create solid from surfaces

[bigodinos]

Hello everyone, I hope you can help me, I'm not a proe expert. have passed me a set of a composite mold of all the details .prt but they are all surfaces, how do I make the details solid? because I can't make the table and the sections, it basically doesn't see the hidden lines covered. Thank you all. greetings

 

[mali_fx]

Is the witness a step?
from which software comes the step?
It's not easy to help you without seeing!
post an image if you can.
cmq I feel like telling you that if the axieme is a step and the open surfaces come to you it means that you have to intervene with the datadoctor.
Entering the part you make definition-datadoctor modification and systems the open surfaces and once closed you create the solid with the ''solidify' command that you find it under the ''modification' drop-down menu.
the procedure is this, clearly if the surfaces are very complex is a blood bath.

Hi.

 

[bigodinos]

Hi, thank you, I have an asm file and the prts for every detail, I do not know how it was created , but I believe with proes, cmq for example if they select the basic element_sup the surfaces are united between them, I make solidification but asks me "select a surface or surface union to add or remove material from a solid."

 

[maxopus]

without seeing the file it is difficult to give the right advice.
Can you zip it and attach it, or do you have confidentiality issues?

 

[mali_fx]

Hi, thank you, I have an asm file and the prts for every detail, I do not know how it was created , but I believe with proes, cmq for example if they select the basic element_sup the surfaces are united between them, I make solidification but asks me "select a surface or surface union to add or remove material from a solid."

If you tell me that it is 1axieme pro and, it may also be that there are unhidden levels within the parts that overlap the solids and visually you seem to have the open surfaces and that the solid is not there.
I'm randomly shooting obviously not even having a rag of image.

 

[bigodinos]

Hello, here is a zipped prt of the top base, I hope you can help me, in practice when I display hidden lines I show purple, not white and gray, same thing in drawing. greetings to all and thanks for the interest

 

[mali_fx]

Sorry I was late, but I was on vacation.
I understand your problem.
as first I tell you that this is not a file of pro and but an imported file.
you have to intervene with the datadoctor cmq.
in the case of the file you posted there were 4unions of surfaces that were enough to be joined with the merge command and another union that was to be cut out.
so as you will also see in the file that I posted you I made a trim first then a merge of the whole model. all in 2min.
clearly on printer parts and other more complex parts is not so immediate but surely you do it with a little patience.
if you can't post everything you have that you slowly sistempoli I just find a little time.

 

[giocamb]

a step file that comes from catia
I have all the surfaces open only a few are united, the problem that is a bumper with all the components and it seems like a crap to put themselves there to make the merge of sulfite waves and to extend and trim the surfaces that do not connect, seen that surely those who did the math looked at it and exported it to the dead child, and these things make me mad a lot because they want to say that on the other side

said this to me once that with catia it is enough to open the axieme that you want to export-copy the details-create a new part or assembly, and to paste, of all this and success that the copied details are only solids and not all the dirt of layers surfaces and other still that you create catia,do this you export the file in step or parasolid that according to me are the best to work with pro/e.

I just wanted to know if what I wrote is the truth maybe from someone who worked with catia.
thanks to all and good domentica