jacopo.g
Guest
as I can file the part that I highlighted in the disengagement, the thread must be 12*1, 75 and 40 cm long, I tried to make cosmetic fillet but I can't view the thread on the drawing.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
meccanicamg
Guest
simply because you made the diameter wrong!! should not be 12 but equal to the bottom diameter of the throat, therefore less than 12. then in the cosmetic thread note write m12x1.75 and in the table click on the fine lines of the thread, right click, insert caption. to me then everything works!as I can file the part that I highlighted in the disengagement, the thread must be 12*1, 75 and 40 cm long, I tried to make cosmetic fillet but I can't view the thread on the drawing.
I don't understand why there are lines to remove. It is right that there are those lines between straight/curve/right. the rules of the design are met.
MassiVonWeizen
Guest
to me the thread appears.
only that if you have the diameter of the 12.2mm round and place a 12 thread, in order to see it you have to zoom a lot.
I recommend that you fully define sketches with quotas and constraints so you will be easier to manage your work and solve any problems.
only that if you have the diameter of the 12.2mm round and place a 12 thread, in order to see it you have to zoom a lot.
I recommend that you fully define sketches with quotas and constraints so you will be easier to manage your work and solve any problems.
Mike1967
Guest
download the file, it's a video, it should clarify your ideas. At least I hope. :tongue:as I can file the part that I highlighted in the disengagement, the thread must be 12*1, 75 and 40 cm long, I tried to make cosmetic fillet but I can't view the thread on the drawing.
Attachments
jacopo.g
Guest
Thank you so much, your video is exactly what I need for me, thank you all for the helpdownload the file, it's a video, it should clarify your ideas. At least I hope. :tongue:
Mike1967
Guest
Help yourself in learning with youtube, my channel is kawasakimia (not that I published a lot, but something is there..).Thank you so much, your video is exactly what I need for me, thank you all for the help
right today a new user posted his channel, look on the main page under "useful resources" (or similar). . .
Good learning!
jacopo.g
Guest
Thank you, I'll visit the channel.Help yourself in learning with youtube, my channel is kawasakimia (not that I published a lot, but something is there..).
right today a new user posted his channel, look on the main page under "useful resources" (or similar). . .
Good learning!