created an irregular continuous line

[warburg]

I apologize if I put a new post on this subject, but as usual the rush and not having found indications so far push me to do so
I wanted to draw floorings in rough stone blocks and I would prefer to be able to use a continuous line from the slightly irregular trend. I can't study the procedure and produce it by myself, I look for it in the form of .lin files ready... I tried to load that presentation in the other post davideBut there's some problem and I don't charge it.
do you have any other links?
Thank you.
Hi.
C

 

[lattu]

try to squirt by hand and scan an example

 

[warburg]

for now I make a few locks by hand and then cover them, so much I have to use a piece with few dimensional variations, I do not in time to investigate beyond.. .
Hi.
ps: anyway, like the one you see in the image below

 

[sigur ròs]

if you can be useful there is the sketch command, if not mistaken, it halves your working time! ! ! !

 

[warburg]

if you can be useful there is the sketch command, if not mistaken, it halves your working time! ! ! !

Great! I didn't remember that, actually, it's :finger:
Hi.
Thank you.
C