creation of "precut" sheet

[MBT]

Good morning to all of you

We look at the "alleged" sheetfor cuts on the straight side, there is no problem, of course
but in the "calandrate" area?
the command "cut" rightly makes a perpendicular cut on the floor, which is not correct as in the design
the ideal would be to be able to cut on the flat model and find it in the folded model

How would you solve such a problem?

thanks to all

 

[VigZ]

draw it flat and then use the fold (fold) to pull up the two lembies, right?

 

[Catafratto]

in rel. 2011 there is also the pair of commands explains/repair to "develop" temporarily a sheet, do some processing and then fold it preserving the effects of the processing.

 

[MBT]

draw it flat and then use the fold (fold) to pull up the two lembies, right?

I thought about it, too. :finger:
but I preferred to shape it bent because I need to "copy" the fold radius from another part... preferably adaptive:frown:

 

[MBT]

in rel. 2011 there is also the pair of commands explains/repair to "develop" temporarily a sheet, do some processing and then fold it preserving the effects of the processing.

good to know
sin that I have 2009 for "business" reasons

 

[VigZ]

Well but in such a case, make the bandage first (or draw it flange contour), then smooth it and cut it and then re-tirarla su does not change at all the final result from drawing it flat cut and then make the bandage.

with 2009.. with 2011 or 10 then you have the advantage of adactivity

 

[Catafratto]

no, it does not change, it was only an alternative according to preferences-experience with the plates.. .

 

[MBT]

Well but in such a case, make the bandage first (or draw it flange contour), then smooth it and cut it and then re-tirarla su does not change at all the final result from drawing it flat cut and then make the bandage.

with 2009.. with 2011 or 10 then you have the advantage of adactivity

There's something wrong with me.
I folded design (as flange contour) and spy
If I make a cut on the flat plate, then I don't find it in the stuffed sheet

 

[VigZ]

Ocio. .

2009 -> flat drawings + blindfold

>2010 -> profile drawings (with curved activity) + explain (which is not flat model you know with 2009) +cuts + fillings (which is not the folded back model).

but this for me, apart from the adactivity of the curvature, does not lead to different results than the ' 09 method'

 

[Catafratto]

if you work on the flat model happens like this: the new 2011 command serves just to bypass this problem, creating a temporary "flat model" on which to work. . (made the proof before writing to be sure not to say stupidity;-))

 

[MBT]

Okay.
Now it's clearer.. .
I'll give you a try

Thank you