creo 2.0 - use model in tree (blank/unblank)

[Endes]

Good afternoon to all! I will briefly explain to you my problem:

until a short time ago I used wildefire 4.0, and when I had to display a component of a set in the table, I did nothing but select the view in question, click dx button and select "use model in tree".
in this fashion from the tree of the model I was able to select the parts that I had to "blankare" and to keep only the part that I was interested in, greatly reducing the times regarding having to turn off part by one.

Now I ask myself: in creo 2.0, which I use for a few days, is there a possibility to do the same? (I've tried in a variety of ways, but I can't handle it)

average beer to those who solve the problem

 

[BFausto]

Hi.

Sorry I'm late (I don't like beer).
what you can do is select in the model tree in 2d (low left) the component you want to represent individually and with the dx button "set add/model design" so, at the next view you add, will refer only to the model in question.

 

[BFausto]

Hi.

Sorry I'm late (I don't like beer).
what you can do is select in the model tree in 2d (low left) the component you want to represent individually and with the dx button "set add/model design" so, at the next view you add, will refer only to the model in question.

I forgot. . .
In this way the added view is not a simplified representation of the starting aid but refers to an additional model in the 2d (identical layout operation -> design models -> add model).

 

[Endes]

I thank you for the interest, but in that way I can't automatically affix the balooms and I have to manually set the references #
Unfortunately the "use model in tree" option of wildfire 4 cascavates just at bean to quickly make the views while keeping the connection with the long legends we use.

I forgot. . .
In this way the added view is not a simplified representation of the starting aid but refers to an additional model in the 2d (identical layout operation -> design models -> add model).