creo distributed batch 11.0.0.0 - export problems

[Daniele-san]

Good morning.
I wonder if you have noticed export problems with creo distributed batch 11.0.0.0.
once I started the groups with the settings set (using the same .dxc file I created since I started using this tool) does not end the export some files remain in the "operative" status some "not delivered" (no one in the "unfinished" and/or "unsuccessful" status) status and in the directory assigned for export there are no files.
Thank you.

 

[freexf]

What kind of operation are you talking about?

 

[Daniele-san]

What kind of operation are you talking about?

Bye-bye
are export of files in pdf or dxf (regarding drw) and stp (regarding prt and asm)

Thank you.

 

[freexf]

Try not to use an existing dxc but do as parts from scratch.

 

[nicksoft]

yesterday came out on 11.0.1.0, you can try with that if you can't understand in other ways

 

[Daniele-san]

Try not to use an existing dxc but do as parts from scratch.

Hi.
Yes.
after I found the problem

 

[Daniele-san]

yesterday came out on 11.0.1.0, you can try with that if you can't understand in other ways

Hi, I tried right now... It's like the same way.

 

[nicksoft]

I tried to make two identical batch exports (drw -> dwg) from creo 10 and creo 11, set from zero, worked in both cases.

 

[freexf]

made a test at the pdf exporting flight of a couple of tables and it works me creo11. possibly you could check if there is a distributed batch restriction in windows security settings.

 

[Daniele-san]

I tried to make two identical batch exports (drw -> dwg) from creo 10 and creo 11, set from zero, worked in both cases.

I also tried with version 10.0.4.0 works while with 11.0.0.0 and 11.0.1.0 does not work

 

[Daniele-san]

made a test at the pdf exporting flight of a couple of tables and it works me creo11. possibly you could check if there is a distributed batch restriction in windows security settings.

non credo may dipendere da questo

 

[nicksoft]

Are current export logs created? (e.g. dwg_2d_export_ttd.log.1)
I would also look at the creo trail, if it is executed.
look even if you find std.out that can show any problems.

 

[Daniele-san]

Are current export logs created? (e.g. dwg_2d_export_ttd.log.1)
I would also look at the creo trail, if it is executed.
look even if you find std.out that can show any problems.

Hi nicksoft,
Maybe I solved after multiple tests... apparently there is a string of the config.pro that does not allow dbatch to continue in operations, probably in version 11 (compared to 10) has changed something and while not changing the config there is some string that does not digest... .

Now I have to understand which of the many....

 

[Daniele-san]

I should have solved... .
the problem is inherent in the config. pro that with the new version, I create 11 previews the move of the macros in the file mapkey.pro for which in the config should be deleted
apparently they affect the good functioning of dbatch
greetings

 

[nicksoft]

but do you use a standard dbatch action or an action based on your macro?

 

[Daniele-san]

but do you use a standard dbatch action or an action based on your macro?

a standard action created with selectable ttd files,
the tool for simple exports (stp pdf dxf)

 

[freexf]

I should have solved... .
the problem is inherent in the config. pro that with the new version, I create 11 previews the move of the macros in the file mapkey.pro for which in the config should be deleted
apparently they affect the good functioning of dbatch
greetings

too strong resolution