• This forum is the machine-generated translation of www.cad3d.it/forum1 - the Italian design community. Several terms are not translated correctly.

custom materials/properties

  • Thread starter Thread starter Super geno
  • Start date Start date

Super geno

Guest
Mr President, ladies and gentlemen, I should like to congratulate the rapporteur on his report. I found the program messed up by an old employee, and I have all the defaults saved with his pastries.
 
Try to be clearer.
inserting the properties of a part in the cartilage of a set is not possible beyond that to make sense.
insert two equal parts and want the exact quantities of what? Where?
what defaults?
It seems to me that it is not only the employee to make confusion
 
I am sorry for the confusion, my problem is to have the exact quantities for production in the cartilage, rather than to put them by hand with the risk of confusion or forgetfulness, etc. I would like them to be updated automatically.
if I process the distinct materials in which the original file(boom material) has been tampered with, I no longer select the exact quantity but the amount in the property of the file that I insert by hand.
 
in the cartouche of what? the part?
Cartridge and distinct materials are two absolutely different things and you cannot mention them as if they were synonymous.
the distinct materials has a qunatity voice that reports the number of times that the part has been inserted in the axieme and has nothing to do with the custom properties.
I do not think this item is acceptable and I do not think it is possible to add it as always present.
 
My problem persists, I find myself in the condition that I have to fill in the hand cartilage for production.
the iter to make you understand is this:
after designing a general assembly and all its subgroups bought the respective parts I generate a table a distinct general material composed of all the components of the assembly . of which for each group in turn I realize a distinct base of the group with all its components, that I send both to the purchases and to the warehouse for the picking of the components and to the final assembly .when they arrive the drawings in production , as they are not managed from a management c'
Is there a way to avoid producing exact quantities?
distort the cartilage It's okay. I know, but to avoid stories with production elaborated at the end of the general distinction and on each part I put the quantities by hand, with a threshold of human error. if in his experience he has some advice is well accepted.
in the company are evaluating the purchase of a management but with the times that run .....
Thank you very much
 
Mass has given you the solution to the problem, to launch the macro that you find in the discussion, this in the custom properties of each component creates a property with the number of instances within the axieme in which the macro was launched, of course it must be launched at the highest level of the axieme.
in the component table you create the variable linked to the property so in the cartiglio (as you say) you appear the total amount to be built.
in distinct materials add the column that points to this property and the game is made.
It is assumed that every change made on the axieme on the addition of new instances or components should be relaunched, the tables are updated and also the distinct.

You seem to have not read the discussion that linked you massive.
 
I didn't really understand mea culpa.
I downloaded the macro, can I ask how to connect the property to the macro?
I'm a ciuchino in these things and I don't want to hurt! the machine contains about 4000 commercial parts excluded I would not want to waste time pio to fix everything
Thank you for your friendly answer
 
open the upper-order axieme you want to have the quantities of all the parts in it, regardless of the level within the axieme. Launch the macro and choose in the macro interface the name you want to give to the property that contains the amount of each part. the macro makes you choose whether to write this property within the parts contained in a certain folder, or go to write the property even in those outside, like a bookcase. I usually when I use it, put all the components that need me inside the workbook. libreia components that I need to be counted in the work I cover them in my folder and then insert them. this is because if you should have to count the amount of library components in another job you risk overwriting the property and then lose control of what you are doing in case you reopen an old job. I hope I have explained what you need to know.
 
OK, let's see if I understand, I open the whole machine together, I launch the macro, momentarily I created the q.ty property as the macro name.
then in the property of the cartiglio part I selected the property q.ty
but does not change.
 
It's impossible that it doesn't change... you definitely want something... message of images x make you understand what you do, otherwise it's hard to help you
 
I launch the macro, then tell me the procedure I have to do to see the results in the paper mill
Thank you.
 
are you connecting the variable to the side or board property? It can't be that it doesn't work.
 
I created the property of the part in the propety tab builder , with the name of the same property as the macro , but once launched it does not update .in turn I inserted the property in the cartiglio
 
I told you if you could insert images x let us understand that it is better...however, the 1 error is that you don't have to create the variable, or better not necessarily because it thinks the macro to do it directly within the individual parts. then what does it mean "in turn I put the property in the cartella"? I assume it's a note that recalls the ownership of the part... clarify a little
 
so in the ptb I have to cancel the amount property since it creates the macro directly?
I meant exactly that I collect a note from the new property that creates the macro!
 
So... so it's difficult, so I put some pictures of what you mean by x make you understand better. If the property you have created it you do not need to erase it, but however it is not necessary to create it we xché think of the macro. said this once you launched the macro, within the parts the correctly edited property appears, that is with the correct number? when you create the note in the folder you say, does the design only contain the part or also contain other parts? must contain only one part. Now, I've come up with something... try to insert the note with the quality not inside the cartiglio, but only inside the drawing. Does it work in this case?
 
I have tried several times but I can't get the propitiation of the macro automatically.
So from that I can't put it in the note in the cartella!
this evening poster 2 photos
Thank you so much for your patience
 

Forum statistics

Threads
44,997
Messages
339,767
Members
4
Latest member
ibt

Members online

No members online now.
Total: 88 (members: 0, guests: 88)
Back
Top