custom name

[camoz87]

hello to all, I have a problem with the name configuration of the minuteries. For example, if I insert a m6x45 iso 4762 m6 x 45 - 24n: I rename the screw configuration tcei m6 x 45 and in the axieme it appears correctly.

when my colleague opens the axieme finds the situation as from image: m6 screws replaced by iso 4762 m10 x 45 - 32n and obviously do not pass from the hole ø6,5.
the nut instead remained intact, with the correct size and custom configuration name.

How is this bug possible? Thank you.

 

[MassiVonWeizen]

I suppose you use the toolboxes. Of course, local libraries are loaded, so rename a configuration doesn't help but it creates problems because then opening it from another pc will not find the configuration and the program will arrange as it can.

note in margin:
since you did not continue this debate you may have found the solution on your own; in this case it would be useful to share it

 

[camoz87]

ok thanks to clarification, so should we create a shared toolbox folder to uniform configuration names?

for the other discussion I solved, now I publish the solution

 

[MassiVonWeizen]

Should we create a shared toolbox folder to match configuration names?

if you just try to use the toolboxes you. I suck her like the plague because they are heavy and unpractical. make a customised and configured screw does not take long and you can manage it as a local library synchronizing it to the occasion

 

[camoz87]

Okay.