cylinder

[teoros]

Hello everyone.. .
I was doing the top of a cylinder and I want to move the stem with his race.
I inserted the cylinder body and then its stem.
as a bond I chose the cylindrical bond.
and at this point he asks me:
(1) Axis alignmentI highlighted the stem axis and the axis of the cylinder body hole
(2) asse di traslazioneinsert the minimum value (sit all inside) and the maximum value (sit all out)
what are the "current position" and the "regeneration value"? I have entered an inherent value with my race.
(3) asse di rotazione I didn't put anything

at the end the stem does not move. Where did I go wrong?

Thank you very much

 

[teoros]

...it moves only in the insertion phase of the bond using the play and stop button on the bottom right. then returns to the position inserted in the "regeneration value".
but when it is inserted in a set it is completely blocked. How do you get the two of his positions?

 

[DANI-3D]

Hi.

for this application the most indicated bond is the connection "course", where you must indicate the axes and plans along which the stem can move

 

[Mr.Rio]

Hi.
I did it in speed, I hope it could be useful.. .
I put the regeneration value on the rotation, so that regenerating the stem remains in its position in relation to the race but returns to the 'zero' on the rotation.
greetings

 

[teoros]

thanks for the tips and for the example:d. you are all very kind.
I also did something similar and with both constraints (course and cylinder). the stem moves, between the two limits min. and max., only during the management of the constraints. i.e. when I save and return to the bed, the stem remains fixed.
Is there any option you have to check out or is it normal?
Good weekend

 

[Mr.Rio]

thanks for the tips and for the example:d. you are all very kind.
I also did something similar and with both constraints (course and cylinder). the stem moves, between the two limits min. and max., only during the management of the constraints. i.e. when I save and return to the bed, the stem remains fixed.
Is there any option you have to check out or is it normal?
Good weekend

If the cylinder in the axieme has to move something, even this must have movement constraints and not fixed...maybe this is the problem.
greetings

 

[teoros]

Maybe I solved the problem...I read that to move an object you also have to crush the keys "ctrl" and "alt". actually now moves.
Is that right?

 

[Mr.Rio]

Yes, there is that system or icon with the handle and x on the top left (drag components).
greetings

 

[teoros]

discovered also the handle with the x. great, now it is okay.
Thank you.