• This forum is the machine-generated translation of www.cad3d.it/forum1 - the Italian design community. Several terms are not translated correctly.

demand use urgent inventor

  • Thread starter Thread starter Bonomiz95
  • Start date Start date

Bonomiz95

Guest
good morning, as from object I wanted to ask if it is possible or how you can make a sheet development with a fold on another fold using inventor.

Thank you.
 
but it is not that with this the question is much clearer... .
scarabocchio is also a simple sketch in perspective on paper that definitely makes better than the attached image.
Thank you.
 
from autocad to inventor I had to adapt the piece, from 0 up to 45 then down again to 45 degrees so as to create a recess that to descend widens. . while on top of another fold from 90 degrees. the sheet deforms I know, but in theory where converge the folds to 45 degrees that go beyond the fold point of 90 degrees the sheet is flat as in the previous image of autocad
sviluppo.webpImmagine.webp
 
the first is in autocad with hand-made manual development. the second with inventor with the plate adapted to make it come out with the same development.
However, it does not appear as I would like because I do not want any spread in the sheet.
 
see in the fold settings, laceration, second card or if that part is still flat do a sketch, project geometry then extrude joining then see if it accepts and develops. alternatively explains, sketch, project, extrude. flat model operations do not need
 
graziano-g said:
see in the fold settings, laceration, second card or if that part is still flat do a sketch, project geometry then extrude joining then see if it accepts and develops. alternatively explains, sketch, project, extrude. flat model operations do not need
Click to expand...
Okay.
 
graziano-g said:
see in the fold settings, laceration, second card or if that part is still flat do a sketch, project geometry then extrude joining then see if it accepts and develops. alternatively explains, sketch, project, extrude. flat model operations do not need
Click to expand...
hi, sorry the question but being in the beginning with inventor I am not very practical... .
What do you mean by fold laceration according to inventor card?
already that there are added that I must obtain the sheet from surfaces of a reference part
Thank you.
 
graziano-g said:
see in the fold settings, laceration, second card or if that part is still flat do a sketch, project geometry then extrude joining then see if it accepts and develops. alternatively explains, sketch, project, extrude. flat model operations do not need
Click to expand...
hi now I'm trying to do some things, partly it does, but if I make a flat model makes mistakes, I would like to do it starting from a surface that follows the piece with thickening. sheet metal laceration I have not yet understood what is nor what is meant by second inventor board.. .
Thank you.
 
Hi, I couldn't develop the sheet that I attached.... you could give me an example so I can orient myself better, maybe with something already done.
Thank you.
 

Attachments

already... so impossible to open with 2019....
in any way technically that piece cannot be realized with the bending machine because when the last flap is folded at 90°, the long and narrow one, the terminal part of the folds at 45° on/down is crushed between prism and knife. as far as I'm concerned with that component you can only make molding. Anyway I see to recover 2020 so I open the attached file and see.
Hi.
 
that sheet will never develop, you must have all the edges connected (internal r3 and external r6 ).
said this, as it is modeled you cannot put the fittings.
It's conceptually wrong, but now I don't have time to fix it.
I see later.

allego converted file in step
 

Attachments

Forum statistics

Threads
44,997
Messages
339,767
Members
4
Latest member
ibt

Members online

No members online now.
Total: 41 (members: 0, guests: 41)
Back
Top