design for configuration

[Anothermatt]

I am sorry, but as I have already anticipated, being at the first weapons in this process, I am constantly blocking.
I can't find information to solve my question.....I need every configuration to be connected a table set, instead every time I propose to open the file during the different stages always refers to the first created.
are all configurations derived from what I use.
Thanks again

 

[stefanodeutz]

hi, if you have configured the component well, when you select a sw view proposes you with which configuration you want to see, I attach screenshot

 

[MassiVonWeizen]

if you are at the first weapons do the tutorials
you mean from the model you do open design? and would you like to open the table connected to the configuration you have activated at that time? specify well the procedure you use

 

[Anothermatt]

when I open the drawing I would like to open the table connected to the active configuration at that time.....it is true that when I open the sw table I propose the configuration that I want to see, but all the rest inside the table remains unchanged, so if each configuration has its explosion with lateral instructions etc...when I change the configuration of the view that becomes however disconnected from the context in which it must be

 

[MassiVonWeizen]

yes when I open drawing I would like you to open the table connected to the active configuration at that time

explains exact procedure, because to open a design from the model there are more methods and each can give different possibilities.

It is true that when I open the sw table I propose the configuration that I want to see, but all the rest inside the table remains unchanged, so if each configuration has its explosion with lateral instructions etc...when I change the configuration of the view that becomes however disconnected from the context in which it must be

It's not easy.
Isn't that confusing between opening and drawing? a design cannot be configured, so you cannot open a design and have configurations that are proposed

 

[Anothermatt]

ok, I try to explain to myself at best....when I said open, I meant by right-clicking on the screen and clicking on open drawing; When I recall the fact of changing configuration inside the table I refer instead to the fact that if I open the drawing, I click on the view, on the top right there is the reference configuration item that allows me with the drop-down menu to choose which to use, but as already explained I do not need anything since I only change the view status, to me would need separate designs for each configuration and the possibility to open them from inside the configuration when it is active.

 

[MassiVonWeizen]

I was right-clicking on the screen and clicking on the drawing

in that case opens the design that has the same file name of the model; If for example you have the model together1 and three drawings together1, together12, together123 will open the first one, but if you have three drawings together12, together123, together 1234 will not open you any automatically and will appear the window of choice.

if I open the drawing, click on the view, top right there is the reference configuration item that allows me with the drop down menu to choose which to use,

if you open a drawing already made because you have to choose which configuration to use? you have to use it as you set it.
display status and configurations are two different things. you can have a configuration and 10 display states and the reverse.

I would need separate designs for each configuration

So you make a new design what's the problem? but I recommend you make a multifoil design where in each sheet insert a different configuration

the ability to open them from within the configuration when it is active.

This is not possible. improve the situation by making a multifoil design

 

[pose63]

Hi.
depends on which logic you use to save the design file of the single configuration.
e.g. filename_nameconfigurazioen or use as filename the "user-specific name" in the separate configuration property material option. . if you always use the same method then just a simple macro