design of particular

[Martakynghi]

You mean you've always drawn the views that don't match those side by side and it was okay?

in the po in front of the pv from above and in the pl on the side

 

[Martakynghi]

in the pv so from below should I draw it?

 

[MassiVonWeizen]

[ nel PO di fronte nel PV dall'alto e nel PL di lato

that is a fictional and academic name of the views.
you are contesting that the projections are clearly wrong; It is enough to draw a line from a lower view edge to see that it does not match the edge of the upper view... There is to wonder how you did projections without references between views

 

[TECNOMODEL]

in the po in front of the pv from above and in the pl on the side

as you have already said massive is not the type of view and in which plan you put it wrong, it is the projections.

 

[Martakynghi]

What about this exercise?

 

[TECNOMODEL]

I was in you before doing other exercises I would try to understand the method of orthogonal projections.

 

[Vittorio]

are missing some lines of projection.(red)
in the views in the plant where it is clear that it is a circle.. do not put the symbol "ø"
the threaded holes may be placed in the sections, with the depth quota so that those who have to build the piece have in the same view all the characteristics of the hole.

 

[simone1996]

If I can afford, try to shape the objects you need to draw with cad 3d or get them from the real object. so as to understand how the object is made. It is important, according to me, to make a clear and precise design.