difficulty with analysis of movement

[ismail]

Hello everyone ismail a mechanical engineering student. I have to make a project with solidworks 2016, consists of a cannon that I have already done, but I can't create the ball throwing through the compression of the spring of the system that I find in the study of movement. I also created contact with the piston hooked to the spring is the ball but nothing comes out only the movement of the piston because of the compression of the spring. Thank you for the attention I hope you have been clear.

 

[teseo]

Unfortunately the study of the movement is not very simple; as the dassault continues to affirm; You've got to put your head down. .

the first thing that comes to mind is you gave the non-compnetrability between ball and piston? If not from the command you find above the timebar and is called contact. . .
if I don't erro on the net is a tutorial of a throw of a basketball try with you tube according to me you find it....

Hi.
- - - updated - - - -Here is the link try to see if it can be useful. . .https://www.youtube.com/watch?v=0ogwsns2qgq

 

[ismail]

Hello, Teseo.
Thank you for responding, I created the contact. Unfortunately this video I have seen it, already but without having the hoped result as some passages does not show them. for example the position of the ball.

 

[teseo]

I'd put the ball at a point in space any time you don't care where it is.
will be the force you applied to make her move in the desired direction.. .

Hi.