dissolve together/subassistances in separate materials

[tanticapelli]

Hello everyone

I do not remember if there is the possibility to dissolve a set/subassieme directly from the table of distinct materials (generated with indentation and detailed cut tip) already generated but I can not find the appropriate item by clicking with the dx on the line of the axieme/subassieme.

Do you know anything about it?

Thank you

so many hairs

 

[tanticapelli]

I add that the axieme father contains subaxis which in turn contain multibody parts of "structural elements" of the "saving" section.

Thank you.

 

[MassiVonWeizen]

the display of the subaxial parts is managed with the properties of the configurations of the same.
you must correctly set the item separate options materials by choosing between exhibition/hiding/promoting; the result that you get I explained in some post, try to search with one of these last three voices

 

[lucad]

Good evening,
I made a set with different configurations. I was asked one where a plate must be mobile compared to a base. I can not allow rotation movement while trying to suspend one by one couplings. Could it be the problem related to a dissolution that made not find any mating made? I can't fix this:

 

[lucad]

ps if I insert the mobile option for that part, strangely it gives me all the degrees of freedom except that rotation, as if there was something hidden. But I would only need that rotation.

 

[MassiVonWeizen]

bho, you have to imagine in a lot of things, like what does it have to do with the topic of discussion?
and you are still waiting for the discussion in which you brought the problem of alignment of holes.. .

 

[lucad]

thanks for the prompt response; I have not presented that argument anymore because I managed to solve it fortunately. the strange thing is that for other configurations necessarily that rotation was necessary; despite this for default configuration I have this anomaly

 

[MassiVonWeizen]

I can not allow rotation movement while trying to suspend one by one couplings. Could it be the problem related to a dissolution that made not find any mating made?

If you have erased all the matings there is nothing to find.

ps if I insert the mobile option for that part, strangely it gives me all the degrees of freedom except that rotation, as if there was something hidden

if it is hidden to you, for us

I no longer presented that argument because I managed to solve it fortunately

just don't let anything know so!

I have a detailed explanation, but well done, and accompanied by images or make an explanation like this, but better than what you have already done, and attach the file

 

[lucad]

I apologize, but I didn't want to crash the forum... as soon as I have placed an update

 

[lucad]

while I want to make sure I have checked some parameters well

 

[lucad]

basically I did not find a "real" solution; simply because I had more configurations in the same set, so I used another one for the movement and that "locked" I fixed it.

 

[MassiVonWeizen]

you didn't understand anything about what you did because you should imagine a set of which we don't know anything, but thank you for telling us that you solved

 

[lucad]

If I had found a valid general method I would share it, the problem is that I simply limited myself to using another configuration that I had already created fortunately