diversiated scales.

[camaxx55]

hello to all I was a nx1 nug user in a company that made equipment for foundries modeling complex details as
bases and motor heads.
after the crisis I changed company and software but unfortunately went
Bad.
very often I had to apply different retreats on the three axes and up to here...
I wanted to know if you know a way or software that allows
apply variable retreats along a single axis.
consider me unfortunately currently only sympathizing due to force
Major.

 

[Team3d]

hello to all I was a nx1 nug user in a company that made equipment for foundries modeling complex details as
bases and motor heads.
after the crisis I changed company and software but unfortunately went
Bad.
very often I had to apply different retreats on the three axes and up to here...
I wanted to know if you know a way or software that allows
apply variable retreats along a single axis.
consider me unfortunately currently only sympathizing due to force
Major.

pity you are from the Piedmont.... I had a proposal to work to make you at a mobster who uses nx!!!

 

[linus57]

Good morning.
Excuse me if I interfere,
I don't like the quote " sin you are del...."
I have German colleagues who are in the company on Monday morning and go home on Friday 400km
other Croatian colleagues who are 250-300km away
In January, Indian colleagues arrive....
only we Italians are very close to not moving, I cannot understand
because we are so. I haven't moved from the factory for a year.
But I tried to cross Europe 3 times in a week
change of planes 8 in 7 days (think bad if I had more salary
I'm just a designer. I don't say we have to be trottol.
but have more flexibility.
team 3d according to me you should pass the info.
I ask again vein and if I allowed myself to say mine.
Thank you.
peace and good
_

 

[ceschi1959]

Good morning.
Excuse me if I interfere,
I don't like the quote " sin you are del...."

team 3d according to me you should pass the info.
I ask again vein and if I allowed myself to say mine.
Thank you.
peace and good
_

quoting on the whole line.

peace and good to you too.

 

[stef_design]

Good morning.
Excuse me if I interfere,
I don't like the quote " sin you are del...."
I have German colleagues who are in the company on Monday morning and go home on Friday 400km
other Croatian colleagues who are 250-300km away
In January, Indian colleagues arrive....
only we Italians are very close to not moving, I cannot understand
because we are so. I haven't moved from the factory for a year.
But I tried to cross Europe 3 times in a week
change of planes 8 in 7 days (think bad if I had more salary
I'm just a designer. I don't say we have to be trottol.
but have more flexibility.
team 3d according to me you should pass the info.
I ask again vein and if I allowed myself to say mine.
Thank you.
peace and good
_

Yes, you're generally right. but you can't know the choices that lead a person to prefer a job "under the house" compared to a distant one.
For example, your German colleagues (who work at 400km) manage to put on family? :biggrin:
Sometimes in life you have to make choices... work and personal ambitions are not everything!
peace and love

 

[linus57]

Hi.
ok... we are great ... and therefore every person evaluates on his own,
I was only referring to the comment, I did not like it....." "
I just think that if we don't give a hand... it's not good for me.
Thank you:
peace and good
_

 

[The_Matrix]

Hi.
ok... we are great ... and therefore every person evaluates on his own,
I was only referring to the comment, I did not like it....." "
I just think that if we don't give a hand... it's not good for me.
Thank you:
peace and good
_

I would see you well working on my team...

 

[camaxx55]

I thank you for this interest and I confirm that I have taken seriously
considering the idea of moving me.unfortunately here torino we have become
famous for the Olympics and some place was created with tourism but
in mechanics we have lost to thousands and politicians speak only of
First. think I joined a well-known interinal agency
and told me that as a nug user there are no demands
as a designer of small mechanical groups nothing even as a miller
on traditional and cnc.
the only possibility could come from the fact that for hobby I always installed
to relatives anti-theft systems and video surveillance.
many years of experience thrown away.
excuse the rash, returning to the initial problem of differentiated retreats you do not know
No solution?
Greetings to all.

 

[stef_design]

think I joined a well-known interinal agency and told me that as a nug user there are no demands either as a designer of small mechanical groups nothing even as a frestore on traditional or cnc.

but did you ask for a job only in ug?

 

[camaxx55]

during the interview with the manager and also on the resume I gave my
availability also as a frestore both traditional and with selca, the fidia do not remember
Well, even as a radialist who was my first job in the workshop.
to determine conditions also go away to foreign locations of course
dependent in Italy.
with noug starting from laser scans I also made models of foundry and relative c. a.
If we want to call it reverse engineering.
in practice from paper to milled model.

 

[linus57]

Hi.
I'm sorry... I don't know how to help you with differentiated scales,
in my 25 years of moulder the only time I used the scaling with selca 3045 is because I had been delivered a part program made in inches
and not in millimeters.
I've never had the need, I'm sorry, I don't understand you could turn me off what you need?
Hello linus57
peace and well:smile:

 

[beppino]

I wanted to know if you know a way or software that allows
apply variable retreats along a single axis.

perhaps (and I say perhaps, since I know only by hearing say), omnicad could apply a different scale at different points of the same axis, with the deformation function.
I don't know.

 

[camaxx55]

I know that different scales are used for example in shoe moulds.
My question was because in the fury of times for problems
of abnormal retreats we had to change the model manually.
in some cases we had the bond to set the first trait with the withdrawal, the last
without withdrawal and in the middle a gradual passage and all this on a single
axis.
this need has always created complications and even when working
I've never been able to find a solution.

 

[The_Matrix]

I thank you for this interest and I confirm that I have taken seriously
considering the idea of moving me.unfortunately here torino we have become
famous for the Olympics and some place was created with tourism but
in mechanics we have lost to thousands and politicians speak only of
First.

I would have a very interesting work proposal, in germany.. .
necessary:
1) excellent knowledge nx
2) knowledge of shell design

if you want to send me a private message and we'll talk about it

 

[flaviobrio88]

perhaps (and I say perhaps, since I know only by hearing say), omnicad could apply a different scale at different points of the same axis, with the deformation function.
I don't know.

confirmation can be scaled on everything or on one or two axes
You can also tell him to keep an area fixed without climbing anything, usually this option is used in the area where there are "marchs".

 

[RS4]

Bye-bye

If I have understood correctly you want to apply a total geometry transformation operation along a direction, e.g. the right axis, or do you want to transform only a feature or zone and the others remain unchanged? ? ?

explained better give us more information


post an iges an image let's help you


greetings

♪

 

[Team3d]

Hi.
ok... we are great ... and therefore every person evaluates on his own,
I was only referring to the comment, I did not like it....." "
I just think that if we don't give a hand... it's not good for me.
Thank you:
peace and good
_

I'm sorry that you didn't like my sentence and I'm sorry that I couldn't make you understand what I considered a "fineness" . I try to explain it even if it's like explaining a joke and then loses the sense since you try.... but I still try.
in saying "sinking you're from..." doesn't mean "I'll never give you the address because you're far away" but it only means "care!!! I know a job opportunity away from your home and, for privacy reasons, I don't send out addresses to people who are not interested in it, but know that there is this possibility. if you are interested I seem to have left enough addresses around to be contacted ...and I am not referring only to camaxx :wink: if I have not received any request it means that at camxx it does not affect the opportunity that I have pavented and respect it because I am not of certain I want to judge a person according to the km that makes to work.... there are too many factors that connect to these choices starting from the character and passing from the family etc .
x camaxx (and for anyone) if you want to contact me as well that I have no problem telling you everything....anzi
x linu I renew the regret for annoying you, it was not my purpose.. it was just my style not to impose myself with fast solutions and judgments.

 

[IPdesign]

Well, I'd say the misunderstanding is cleared, right?
good parties to the whole group

 

[camaxx55]

I'm sorry if I didn't respond before but I expected to jump into my ex-girlfriend
to draw an example model for the scaling problem.
I assure you that I have read with the greatest interest the proposal for germany
but even if in the past I have made some prints for body bones
I can't call myself an expert in this field.
The respect I have towards the people I don't even know but they offered me an opportunity ago that I can't accept a task that I wouldn't be up to.
my main field has always been the casting industry both cast iron and aluminum.
I don't want to be rude to not answer immediately and take the opportunity to do
to all wishes of good holidays and that 2011 is bearer of prosperity for all.
by camaxx55