divide entities keeping all parts with lt 2015

[alexfunk]

hi, I have to split the semicircle with the two semi-rects holding all the parts: I found the command breaks but the central part deletes it to me.thanks alessandro

 

[GP.]

after selecting the object choose the option "first point", then click twice on the point to use to break.

if you're interested in here I put a lisp to break on a point automaticallyhttp://www.cad3d.it/forum1/showthre...utocad-lt-2009&p=107852&viewfull=1#post107852

 

[PlannerRoad]

...if you're interested here I put a lisp to break on a point automaticallyhttp://www.cad3d.it/forum1/showthre...utocad-lt-2009&p=107852&viewfull=1#post107852

Unfortunately it has the lt.

 

[alexfunk]

Unfortunately it has the lt.

thanks for the answers: does not work the lisp or does not work the command? I tried as gp said, but it always erases a part of me!

 

[Tristan]

you must use the command "spezza in un punto" (toolbar edita) or start > edita > breaks at a point (if you use ribbons)

 

[PlannerRoad]

thanks for the answers: does not work the lisp or does not work the command? I tried as gp said, but it always erases a part of me!

lisp application cannot be used on lt.

 

[GP.]

Unfortunately it has the lt.

:tongue:

thanks for the answers: does not work the lisp or does not work the command? I tried as gp said, but it always erases a part of me!

 

[alexfunk]

I thought there was a command to break the semicircle in three parts with both semi-rects without repeating the operation.

 

[Tristan]

No, you can't. with lt you have to repeat the operation

 

[alexfunk]

Thank you all!