docfa and pregeo for mac

[antolucio]

good morning to all, I have a macbook pro retina, and I wanted to install the docfa and the pregeo but they are only for win, looking on the internet I found an alternative program is called ninth to but costs about 1200 euros.
the question is this you to use the docfa and the pregeo that are free have another computer with win or have you found a free alternative program that runs on mac?

 

[enri]

you could install windows, through a virtualization program, you will practically have a window on the mac, with windows inside, and you can transfer the files to the flight between the two systems. I don't think there's any alternative. the best is parrallel desktopIt doesn't cost much. obviously needs a copy of windows.

 

[paolo.c]

con wineskin http://wineskin.urgesoftware.com/tiki-index.php you can install both docfa and pregeo without needing to emulate the entire windows operating system.
for docfa you must install first both adobe reader and java virtual machine for windows.
for pregeo adobe reader and this: http://www.microsoft.com/en-us/download/details.aspx?id=7151

 

[antolucio]

Thank you very much, I will try to do as you recommended me paolo seems to me the least invasive solution.

 

[stefanolori]

hello paolo, is not that you could explain step by step how you install docfa on mac? Not everyone is good!! !

Thank you in advance

 

[paolo.c]

hello paolo, is not that you could explain step by step how you install docfa on mac? Not everyone is good!! !

Thank you in advance

wineskin downloads from here http://wineskin.urgesoftware.com/tiki-index.php?page=downloadsscarichi adobe reader of qui http://get.adobe.com/it/reader/completion/?installer=reader_10.1_italian_for_windowsjava virtual machine for windows from here http://www.java.com/it/download/manual.jspdownloads docfa

cups or wineskin winery moves in the application folder, open it.
click on "update" and give it to you.
click on the "+" symbol and then "download and install", and give the ok.
click on "create new blank wrapper" and write "docfa" or whatever you want, and come on.
click on "wiew wrapper in finder".
right click on "docfa" and "show package content", open the application "wineskin".
click "install software" and then "choose executable setup".
select the installer of adobe reader previously downloaded and proceed with the installation, give ok also to the next window.
do the same to install java virtual machine and docfa.
click on "advanced" and then on "browse" and select the executable of the docfa "docfa4 > pgm > docfa40.exe.
click on "test run" and the docfa should leave.

Then just open the docfa application(or as you wanted to call it) which is in the user application folder not in system applications.

It should be all, bye.

 

[santacruz]

wineskin downloads from here http://wineskin.urgesoftware.com/tiki-index.php?page=downloadsscarichi adobe reader of qui http://get.adobe.com/it/reader/completion/?installer=reader_10.1_italian_for_windowsjava virtual machine for windows from here http://www.java.com/it/download/manual.jspdownloads docfa

cups or wineskin winery moves in the application folder, open it.
click on "update" and give it to you.
click on the "+" symbol and then "download and install", and give the ok.
click on "create new blank wrapper" and write "docfa" or whatever you want, and come on.
click on "wiew wrapper in finder".
right click on "docfa" and "show package content", open the application "wineskin".
click "install software" and then "choose executable setup".
select the installer of adobe reader previously downloaded and proceed with the installation, give ok also to the next window.
do the same to install java virtual machine and docfa.
click on "advanced" and then on "browse" and select the executable of the docfa "docfa4 > pgm > docfa40.exe.
click on "test run" and the docfa should leave.

Then just open the docfa application(or as you wanted to call it) which is in the user application folder not in system applications.

It should be all, bye.

hi, I tried to follow all the steps, the docfa starts but if for example try to open a new job, opens the right window but then there the buttons are not clickable etc, as if the mouse did not work. Can you help me?
Thank you.

 

[santacruz]

I did not find on the site a section for presentations and similar, I do it here.
My name is flavio, I'm from the fishing province and I'm a civil engineer. I use cad mainly in 2d and sometimes I delight with some small 3d work.

 

[santacruz]

I solved, in practice it was enough to change the engines and choose on 1.4.1.

 

[toffol]

wineskin downloads from here http://wineskin.urgesoftware.com/tiki-index.php?page=downloadsscarichi adobe reader of qui http://get.adobe.com/it/reader/completion/?installer=reader_10.1_italian_for_windowsjava virtual machine for windows from here http://www.java.com/it/download/manual.jspdownloads docfa

cups or wineskin winery moves in the application folder, open it.
click on "update" and give it to you.
click on the "+" symbol and then "download and install", and give the ok.
click on "create new blank wrapper" and write "docfa" or whatever you want, and come on.
click on "wiew wrapper in finder".
right click on "docfa" and "show package content", open the application "wineskin".
click "install software" and then "choose executable setup".
select the installer of adobe reader previously downloaded and proceed with the installation, give ok also to the next window.
do the same to install java virtual machine and docfa.
click on "advanced" and then on "browse" and select the executable of the docfa "docfa4 > pgm > docfa40.exe.
click on "test run" and the docfa should leave.

Then just open the docfa application(or as you wanted to call it) which is in the user application folder not in system applications.

It should be all, bye.

good day to all and congratulations for the valid indications on the topic of the forum.
I would like to indicate a solution for users who, like me, operate with docfa 3.1.14 from the Trentino-Alto Adige region. in fact I followed the good indications of paolo.c, but when I was looking for the executable file of docfa naturally I did not find docfa40.exe that is created only by the national docfa. the executable file of the docfa 3.1.14 for the provinces of thirty and bolzano is instead nzu000.exe and that is what must be selected before doing test run. then you have to change the engines with 1.4.1 as well said by santacruz. I found one problem: When I ask for the video display of the created document, the lines that form the frames are replaced by many '. but making the video print preview is perfect: Unfortunately I can not print it entirely on a sheet a4, because the right part is cut from the sheet. I tried changing the print format and nothing changes. I tried to register as pdf but I can't understand where (and if) saves me a pdf as I didn't find there anywhere. I solved (unfortunately) exporting the work on a pc winzoz and opening it from there with the same docfa and printing it accordingly. I hope I was useful. Hello everyone

 

[Tristan]

[OT]soon he will come out docfa 4 rtaa and seems to be an acrocchio similar to platav. If I had mac I would start sweating cold.. .[/OT]

 

[toffol]

[OT]soon he will come out docfa 4 rtaa and seems to be an acrocchio similar to platav. If I had mac I would start sweating cold.. .[/OT]

Hi, I saw on the pat's website the docfa 4 test phase but I don't know anything about it. It is already so much if I managed to print these three modules so much to present the stacks before July 22 (when they told me will happen the catastrophe with only telematic delivery.....). boh, fortunately we have a more than twenty years experience with the use of mac in "hostile" environments! we hope well for this time too.

 

[lorenzolau]

wineskin downloads from here http://wineskin.urgesoftware.com/tiki-index.php?page=downloadsscarichi adobe reader of qui http://get.adobe.com/it/reader/completion/?installer=reader_10.1_italian_for_windowsjava virtual machine for windows from here http://www.java.com/it/download/manual.jspdownloads docfa

cups or wineskin winery moves in the application folder, open it.
click on "update" and give it to you.
click on the "+" symbol and then "download and install", and give the ok.
click on "create new blank wrapper" and write "docfa" or whatever you want, and come on.
click on "wiew wrapper in finder".
right click on "docfa" and "show package content", open the application "wineskin".
click "install software" and then "choose executable setup".
select the installer of adobe reader previously downloaded and proceed with the installation, give ok also to the next window.
do the same to install java virtual machine and docfa.
click on "advanced" and then on "browse" and select the executable of the docfa "docfa4 > pgm > docfa40.exe.
click on "test run" and the docfa should leave.

Then just open the docfa application(or as you wanted to call it) which is in the user application folder not in system applications.

It should be all, bye.

Hello everyone,
I found very useful the experience and advice of paolo c to install docfas with the winekm winery, now I would need help with pregeo.
I followed the procedure I had done with docfas but eventually when I go on "advanced" on wineskm I don't know which exe file to choose to start the pregeo, I tried them all also the pregeo.exe file but it doesn't go.
I ask you help if someone explains me step by step as done for docfas, as I have a mac is pregeo only turns on windows.
thanks in advance

 

[paolo.c]

Hello everyone,
Now I'd need help with pregeo.

by pregeo you must install this in advance: http://www.microsoft.com/en-us/download/details.aspx?id=7151

 

[lorenzolau]

by pregeo you must install this in advance: http://www.microsoft.com/en-us/download/details.aspx?id=7151

I did but it doesn't work.
I ask you the courtesy to explain to me step by step how to do.
Maybe I'm wrong with some passage.
also to install this win program you told me above.

 

[paolo.c]

I did but it doesn't work.
I ask you the courtesy to explain to me step by step how to do.
Maybe I'm wrong with some passage.
also to install this win program you told me above.

the procedure is the same, for the pregeo the only difference is that instead of java virtual machine you have to install what I linked to you, but the steps are the same.
I couldn't do it anymore.

 

[lorenzolau]

I downloaded the program from your link.
I opened it, it was a series of folders and extraction files I opened them all.
but I don't understand how to install it, whether the file you linked me, or how to turn it with pregeo.
I'm not that slender, and in fact, when I installed the docfa I followed step by step, what you wrote.
If you can help me by writing step, how to install both the linked win file, and then the pregeo, I'd be grateful.
otherwise thank you the same, and the time you have dedicated me.
- - - updated - - - -I downloaded the program from your link.
I opened it, it was a series of folders and extraction files I opened them all.
but I don't understand how to install it, whether the file you linked me, or how to turn it with pregeo.
I'm not that slender, and in fact, when I installed the docfa I followed step by step, what you wrote.
If you can help me by writing step, how to install both the linked win file, and then the pregeo, I'd be grateful.
otherwise thank you the same, and the time you have dedicated me.

 

[federma]

Hello everyone,
I found very useful the experience and advice of paolo c to install docfas with the winekm winery, now I would need help with pregeo.
I followed the procedure I had done with docfas but eventually when I go on "advanced" on wineskm I don't know which exe file to choose to start the pregeo, I tried them all also the pregeo.exe file but it doesn't go.
I ask you help if someone explains me step by step as done for docfas, as I have a mac is pregeo only turns on windows.
thanks in advance

hi to everyone, I'm new to the forum so I apologize if I make some mistakes. today I tried to install docfa 4.004 with wineskin, but when I open the section to insert the planimetry tells me: "system error - vector management docfav32 not properly installed. count technical support." I looked a bit on the internet but windows sites talk about an anti virus problem. I have not installed any high viruses in the emulation. Can anyone help me? Thank you.

 

[minestrato]

hi to everyone, I'm new to the forum so I apologize if I make some mistakes. today I tried to install docfa 4.004 with wineskin, but when I open the section to insert the planimetry tells me: "system error - vector management docfav32 not properly installed. count technical support." I looked a bit on the internet but windows sites talk about an anti virus problem. I have not installed any high viruses in the emulation. Can anyone help me? Thank you.

hello to all, federma I have your same identical problem with installing the new docfa 4.004 on mac with wineskin. Is there a solution for us poor benefiters of the mac?? ? ?

 

[manuelab]

hello to all, federma I have your same identical problem with installing the new docfa 4.004 on mac with wineskin. Is there a solution for us poor benefiters of the mac?? ? ?

I've got the same problem. Has anyone ever found a solution? Thank you.