does not print some objects of a drawing

[Ig0r]

Good evening,
I press that I am not an expert, in fact I address to you for help, I am a theatrical technician and for work use autocad 2013.
Usually the work I do is simply to draw (2d) the ingot in the plant of the scenery and then to bring them back to the planes of the various stages where the show will go on stage.
this allows me to understand for time any reductions or adaptations necessary.
I went to reopen a drawing last year but I have a strange (for me) problem, I can print the original plan of space, but the lines that represent the design of the scenery are imperceptible, very thin.
I tried to increase the thickness, I tried to redesign them with different layers, I changed print styles, no result.
I also tried to print on pdf, on screen it seems all right but when I mold the pdf I have the same result.
I suppose I'm missing something, but I can't figure out where I'm wrong.
I thank everyone who will be able to give me advice.

 

[MassiVonWeizen]

clean the file from sensitive data, check that the problem persists and attach the file

 

[Ig0r]

clean the file from sensitive data, check that the problem persists and attach the file

thanks for the answer, I provide as soon as possible.

 

[Cristallo]

you probably have a pen file that assigns to the color of the lines you see thin, a very thin print thickness.
try to change color to one of the lines you see thin and see if something changes.

 

[Ig0r]

here, what makes me press problems are the layers "scenography" and "truss"

 

[MassiVonWeizen]

those two layers are the only ones with 0.05 thickness (command layer).
then without ctb it is not possible to control everything.
do an etransmit (menu file>etransmit) and attach that

 

[prismacad]

the objects contained in those layers are old polylines, if the explosions with the exploding command return lines and, if you check a thickness at the level that contains them, they also adapt.

 

[Ig0r]

those two layers are the only ones with 0.05 thickness (command layer).
then without ctb it is not possible to control everything.
do an etransmit (menu file>etransmit) and attach that

Here.

In the meantime I noticed that increasing the thickness of the lines of the two layers (0.50 mm), only the normal lines change, the other objects that are formed by polylines do not change.
If I try to make other lines I'm okay, but not with polylines.

Thank you again.

 

[MassiVonWeizen]

same problem of this thread, in fact the polylines have thickness 0.001.
so if the polylines are necessary it should suffice the modification of the thickness, otherwise use the solution of gelyparis

 

[MassiVonWeizen]

of course I forgot the link to the thread, here it is http://www.cad3d.it/forum1/threads/...ibile-durante-lo-spostamento-di-oggetti/page3Ultimately the thickness of the layers has nothing to do with it, but you have to change the overall thickness of the polylines, do:
Quick selection (Qselect command)
selections all polylinese
open the property panel
impose global width value at 0

any new polyline will have global width 0.001, the variable to set is [FONT=Verdana, Arial, Helvetica][FONT=Verdana, Arial, Helvetica]plinewid to put to 0[/FONT][/FONT]

 

[Ig0r]

of course I forgot the link to the thread, here it is http://www.cad3d.it/forum1/threads/...ibile-durante-lo-spostamento-di-oggetti/page3Ultimately the thickness of the layers has nothing to do with it, but you have to change the overall thickness of the polylines, do:
Quick selection (Qselect command)
selections all polylinese
open the property panel
impose global width value at 0

any new polyline will have global width 0.001, the variable to set is [FONT=Verdana, Arial, Helvetica][FONT=Verdana, Arial, Helvetica]plinewid to put to 0[/FONT][/FONT]

solved!
Thank you for the availability, clarity of explanations and for the patience you had to help me.

Greetings.