double about different cut

[brn]

good evening, I had some doubts about the cutting distinct and welded structures in general


1) I see that the default accuracy of the body length is two decimals, how can it be carried to one decimal?

2) is it possible to create views of individual bodies of the multibody part such as a single tubular or a plate welded on the tubular (with so much development using the sheet functions) ?

3) always talking about welded plates, plugs etc. Is it possible to exclude them from the separate cut? as I would like to see in the separate
only the tubular

4) Can you automatically calculate the total length of a single tubular (for example a 50x50x2) in the part? or exists
any way to set a dynamic account that takes into account length updates?

5) Is it possible to overwrite some properties of the separate cut? for example for particular cuts of the tubular under the corner voice exits me the symbol -, could I overwrite it with a note of mine?

Thank you! !

 

[MassiVonWeizen]

1) the measurement unit should be modified in the document options.
2) Yes. you can use glorious display states or configurations; when converting a sheet metal body a folder is created in the separate cut with sheet metal specifications. and a configuration for each sheet
3) Right button on the folder in the distinct and selects exclude from the distinct
4) is one of the novelties of 2006 but you only see it in the table
5) there is some problem because it is a strange value. is an automatic variable that always provides a number that is 0.00 if not cut. you can not overwrite it but create a new property editable to your pleasure

 

[brn]

1) the measurement unit should be modified in the document options.
2) Yes. you can use glorious display states or configurations; when converting a sheet metal body a folder is created in the separate cut with sheet metal specifications. and a configuration for each sheet
3) Right button on the folder in the distinct and selects exclude from the distinct
4) is one of the novelties of 2006 but you only see it in the table
5) there is some problem because it is a strange value. is an automatic variable that always provides a number that is 0.00 if not cut. you can not overwrite it but create a new property editable to your pleasure

1) :finger:
3):finger:
4) I guess it is tototal length property

as regards:

5) the value is strange because it concerns particular cuts present in 45° square bases, example reversed v grooves to rest and weld on a 45° square tubular, and similar things, I would like to be able to put a warning in table or some indication, therefore I believe the problem is in creating a custom property

2) As for this, tomorrow I will make a couple of tests with the visualization states I do not know.
As for the tubulars I would like to be able to represent the distinct also with the drawings of the individual tubulars and with the example I brought you before I don't think it is possible.

tomorrow if I can attach a drawing or pictures

 

[MassiVonWeizen]

the value of the corner must give it automatically (see image). There are no properties to enter. you can do it as a last resort
as seen from the second image also the cut/extrusion is inserted in the properties automatically
regarding the representation of the bodies you have to distinguish if you talk about the environment part (then it is worth what I told you) or of the environment design then it is enough that at the insertion of the main view you have to select body and you have way to choose which bodies represent what also present on the guide among other things. http://help.solidworks.com/2016/italian/solidworks/sldworks/hidd_dve_named_view.htm

 

[brn]

then I solved the problem of the views of the single tubular, inserting relative views of the model, for the v-cantoning I added the known property
igo image of how it came

 

[MassiVonWeizen]

ok, that groove, if it's the one you were referring to the punt0 5, can't put it in separate cut because it recognizes a single angle per side and not a double (then also wanting how you indicate it with a simple value)

I don't know what you mean by relative view, maybe we talk about the same thing, but to insert the single body into the main view it should be selected seleziona corpi

 

[brn]

with relative view http://help.solidworks.com/2016/italian/solidworks/sldworks/c_relative_to_model_view.htmpopping up the option selects body, it seems to me a pretty comfortable system.

I might be wrong but the total length property does not result in the sum of all tubulars with the same properties?
for example at 2 meters of tubular 50x50x2 rights, not sum 1 meter of tubular 50x50x2 cut differently.

 

[brn]

another question, how do I change the basic model of the cut list so that I can automatically put myself, length, angle 1,
angle 2 etc, without having to add the necessary columns by hand

 

[MassiVonWeizen]

length, angle 1, angle 2 should create them automatically for each element of the structural member

 

[brn]

Yes but when I open the table puts them not by default, I must be adding columns with properties.
I would like that when I go on cutting tables for welds select cut list, insert them automatically

 

[MassiVonWeizen]

you have to specify the questions well. If you're talking about different cut I understand you're referring to the part.
then you go out with the table and then you think about drawing

'this is what to guess the answers is starting to break my cocones a little.

if it is the table in drawing environment then created the first, arranged for benign, the saving as model

 

[brn]

hi would have a doubt: given a simple welded structure type that below:
for tubular 2 they tell me that on the pond is more comfortable the cut measure 50 mm (long-point short) rather than the long toe measurement (the total length to mean us), thinking about it seems to me that it makes sense unlike in tubular 1-3 or tubular with cuts with different directions.
solidworks automatically reports the maximum footprint, there is a way to vary the length reported
of a specific tubular.
Thank you very much

 

[MassiVonWeizen]

in the environment part enters the separate cut and in the properties of the body modifies the voice length.
small personal opinions:
the edges trangentoi in that way cannot be seen. howand we explained mechanicalmg should be represented in thin line https://www.cad3d.it/forum1/threads/spigoli-tangenti.54116/#post-421958the length requested by the operator makes sense because thus traces the starting points of the cut and places the saw blade at the sign. it would be useful for him to have the remaining angle or length between the two edges without obliging him to make calculations.

 

[brn]

Okay, but does that mean that I have to change the body's properties every time I have a cut of this kind, risking trouble if I change some size?
Perhaps it is convenient in the cutting table to put a column with notes
es: length tot. see tubular table

 

[MassiVonWeizen]

you can connect properties to quotas; just select the latter when you are inside the value cell.
Your reasoning is wrong. the tube is 66 long and that's all. If you need to get 10 pieces you need a 660mm rod and not 500 mm.
50 serving the operator, but it is not the length of the tube is simply constructive.

Moreover that quota from 50 and is wrong because, assuming to equip the seghetto and tilt the blade for the cut, the measure of which you have to advance the tube is that of the parallel faces tilted.

 

[bip]

it is not entirely true, to make 10 of those pieces from 66 mm if you have a 660 mm bar brush you advance, since for the first piece you use 66 mm, then the bar advances 50 mm (plus the blade thickness) and do another piece, and so on, and for the last piece you have that the remaining spout has a tilted header, if you want to make it with the face perpendicular to 16 mm .

 

[MassiVonWeizen]

That's right.
to produce it from the warehouse, do you get a 66 or 50?
the cutting distinction does not serve to tell the operator that length must have the piece measured in a certain way or to cut it (for that there is the design), but it serves to indicate the amount of material or the encumbrance it occupies, the quantity inside the model and other ad hoc specifications.

 

[brn]

I have always understood this as the information you need to the operator to prepare everything you need before moving to the welding. is it an incorrect concept?

 

[MassiVonWeizen]

No. but to prepare that piece he needs a pipe 66 long and not 50