duplicate sheet in the table

[cen82]

we need to have the same table but with two different cartilages, one for internal production, one to send a copy of the table to the customer. the cartilage therefore is different.
at the moment I eliminate the cartilage, mold and reinsert it . but this is what I would like to do:

1)design the table with the mill for production
2)duplicate the table in another sheet always in the same idw file
3) replace the cartilage

In this way I would have the two separate sheets with the two cards always available.
Can anyone help me?

 

[rf.infissi@libero.it]

I think the best thing is to set a cartiglio that with the minimum information and then in the other sheet make an external sketch to the cartiglio with the additional information you are interested in and save the design as a model for the next times.
I don't think you can use 2 cartiglio for the same idw

 

[stefanobruno]

in the table insert a second sheet, cover the views from the first sheet and paste them on the second.
on the second sheet delete the original cartiglio and insert the one with the info you interest.
That's all.

 

[rf.infissi@libero.it]

in the table insert a second sheet, cover the views from the first sheet and paste them on the second.
on the second sheet delete the original cartiglio and insert the one with the info you interest.
That's all.

Sorry you could clarify how you put in the second folder,I can't insert it as if you understand that you are right you can insert

 

[stefanobruno]

Could you clarify how you put the second cart?

you must clearly have the second folder available to the idw file you are treating, after which, in the sheet concerned, delete the existing cartilage, go to the card and insert the new one.
For me it's a trivial thing, but if you've never done it, it may not be, let me know if you have solved or better describe what makes you difficult.

 

[rf.infissi@libero.it]

Excuse me but, eliminate it ok, insert from where you do it, where the card is located.
I found to define a new cartouche, but I can't fit it.
thanks for availability

 

[stefanobruno]

I assume that cen82 and whoever wants to do this already has its alternative cartilage, if you don't have it, you have to create it.
to create it, take the existing one, change the definition (opens the sketch of the cartilage ) and save it with a new name.
this new cartiglio can copy it everywhere, having the shortness to keep open the file where this cartiglio was generated.
clearly if it is inserted in the template, you will find it ready for each subsequent table.

 

[rf.infissi@libero.it]

ok solved as you said stefanobruno is trivial.
I'm sorry I learned self-taught inventor and so many things escape even if trivial.
However for someone other than I have not understood you have to expand the design resources node, then files and dx key insert.
to create the cartilage you go from management defined cartilage.

thanks again for the availability stefanobruno