• This forum is the machine-generated translation of www.cad3d.it/forum1 - the Italian design community. Several terms are not translated correctly.

environmental impact and industry

  • Thread starter Thread starter mir
  • Start date Start date

mir

Guest
Hello.
a curiosity but an industrial construction in the industrial area must also pass the commission of environmental impact? Is that a municipal or provincial commission?

thanks for the help
 
what do you mean by environmental impact: via - vas, or the country/country evaluation
 
and sincerely I don't know ... they told me that in an industrial building area there are no problems of environmental impact but it seems strange to me....
 
normally, when the area has already been defined in the prg, in your case as an industrial, these environmental impact assessments are not necessary, unless they are productive insegings that are "periculous" (e.g. chemical production)
By reading the nats attached to the prg, the "limits" of the settlement should already be indicated.
if the settlement is subject to prior authorization of a "tailored plan" then environmental evaluation is necessary. However, even in this second case, the specific indications are given on the issue (technical standards of implementation).
Moreover the area in question should be free from particular constraints (paesagistic/historical or other - always see the nat) in the opposite case are indicated the preliminary authorizations required for the production installation.
the only assessment that is required, should be the country's evaluation, i.e. the "ethical" impact (actually also other), with the surrounding environment. However, as a matter of competence of the regions, the specific provisions must be verified.
I would recommend you a preliminary interview with the use of the commune, which may be related to you.

However, normally the commissions are provincial/regional according to the type of bond and its extension on the territory.
normally are promoted by the municipality, through the call of a "conference of services" by way/vas, so that all the bodies that must express their opinion are present at the same time
 

Forum statistics

Threads
44,997
Messages
339,767
Members
4
Latest member
ibt

Members online

No members online now.
Back
Top