error during flattening

[MassiVonWeizen]

PIEGATURA DI LAMIERA

Ringraziando anticipatamente, mi sono trovato davanti a un messaggio, utilizzando la funzione "piegatura di schizzo", che mi diceva: LA PIEGATURA POTREBBE ESSERE FUSA CON UN'ALTRA, e provando un po tutto non sono ruggito a capire cosa devo fare per sbloccare la situazione. La situazione e la...

www.cad3d.it

 

[Mino69]

attach the step please and the k factor you used

this is the step with factor k 0.3

 

[MassiVonWeizen]

but are you doing it with random measures?

 

[Mino69]

but are you doing it with random measures?

I didn't think it was important!?

 

[MassiVonWeizen]

Why? the tutorial is made with precise instructions, what sense to change without even knowing if the changes will affect the result?
there are instructions and must be followed carefully

 

[Mino69]

Why? the tutorial is made with precise instructions, what sense to change without even knowing if the changes will affect the result?
there are instructions and must be followed carefully

With all due respect, it makes sense if you know what you're building, I'm new to the sw but not certainly in the construction of boxing or whatever. As soon as possible I will do it again, but I doubt that by varying the measures, it will be resolved.

 

[MassiVonWeizen]

With all due respect, it makes sense if you know what you're building, I'm new to the sw but not certainly in the construction of boxing or anything else.

Okay.
Why did you voluntarily change the measurements in the tutorial?

It could be an exhaust, fold parameter, it could be a kiss...

 

[Mino69]

ok, as I told you as soon as possible I try again -unfortunately my training break x today ends here, I have to follow production-
Thank you for your advice and hope you will give me in the future. Good evening