esportare da solidworks 2d ad autocad

[race]

Hello, everyone.
I have a set with more sub-assistances inside. Once put on the table I see it complete and I have to recreate the same in blocks in autocad. I know that until December, using draftsigt, I could dissect the single together, edit, copy in the dwg format and I could paste. then using a common point reassemble everything. Is there a way to create blocks of the assemblies and then find them in autocad? is there a command to convert into lines a very high table in solidworks, and then be able to create blocks?
Thank you.

 

[MassiVonWeizen]

I know that until December, using draftsigt, I could dissect the single together, edit, copy in the dwg format and I could paste

I don't know what you mean. Did you export the axieme as a block?

is there a command to convert into lines a very high table in solidworks, and then be able to create blocks?

solidworks exports already in lines

Other discussionshttps://www.cad3d.it/forum1/threads...n-parti-come-blocchi-o-livelli-diversi.20176/https://www.cad3d.it/forum1/threads/convertire-tavola-solidworks-in-dwg.41683/

 

[race]

the procedure I follow will be so until 31/12. I wouldn't want to pay for draftsight.
I open the 3d model of my axis (inside I have 5 axioms).
I leave the first visible and hide the other 4.
I open a table and fix the side and top views of my 3d collection
I create a point of reference (where I want, it is indifferent. I will use it as a reference to align exports)
I edit, copy in dwg format
I open draftsight and glue to any point.
I create my 2 blocks (side view and top view)
I'll be back in 3d, hid at 1:00 and I'll show the 2.
I go to solidworks table, then again edit and copy in the dwg format.
I go on draftsght and take off at any point.
I create my new axieme blocks 2.
they place them correctly compared to the blocks of the axieme 1 exploiting that "famous" point I created in the table of solidworks and I carry behind and every paste in draftsight.
I repeat for all the others. I will eventually have my subgroups in correctly assembled blocks in dwg.

with autocad this procedure does not work.

I would like that solidworks automatically generate individual blocks (showing all rows, not only those in sight), but it does not.

 

[MassiVonWeizen]

with autocad this procedure does not work.

That doesn't open the dwg? that doesn't make you block? more... ?
I ask why what you do is the same procedure in autocad

Now I have no way to verify why I have no autocad in the office.
Yours copy in dwg format does the same thing as saving by name>dwg and I never had export problems

I would like that solidworks automatically generate individual blocks (showing all rows, not only those in sight), but it does not.

to show you all the lines ovviament edevi set the views with hidden lines visible, if you do not do it in drafsight ne autocad can invent something that is not there.

the method to discriminate components is the one I have entered in the second link that I have entered and that is to make an export hybrid with mapping and using levels

 

[race]

Thanks for the help.
the problem is that the "copy/paste" only works between solidworks and draftsight, to me it would serve between solidworks and autocad.to have the same result in autocad I have to export in dwg every single together, to open his table and copy everything to another where I will grow the main axis. and it becomes long.
I saw the level. but is it not ungraded of carcarseli alone those created? I tried to put the various axioms on different layers, but if one part overlaps, the edges behind hide, I always want to see the "main" edges of the single model. If I activate the hidden edges I also see everything in it and I don't care. to make you understand. I would like an image like the one you put on link 2 with green and black lines. Here, I need real green lines like there's no black part. Then I put the black part on it like there was no green part. I need that result.

 

[drake]

first of all I thank you race x I indicated a "procedura" of creation of dwg boards that I did not know and I had never used. In fact I tried the procedure with an old autocad license lt 2010 and it does not work. I used it with gstarcad that I use now and it works perfectly.

 

[MassiVonWeizen]

I would like an image like the one you put on link 2 with green and black lines. Here, I need real green lines like there's no black part. Then I put the black part on it like there was no green part. I need that result.

As you had written all the lines, not only those in sight I also understood the hidden ones, instead you want to export all the drawing together, including subaxiemi, also viewing the lines hidden from the various subaxiemi
I don't think it's possible to start from a complete set, but only by stepping as you do now; you can speed up by making multiple display states where you hide the various assemblies, in this way created the first table and the various views and set the insertion point you just have to switch from one display state to another to copy the various designs/blocks

I am accusing drake to the thanks of the rescue method