• This forum is the machine-generated translation of www.cad3d.it/forum1 - the Italian design community. Several terms are not translated correctly.

examination of pavia machines

  • Thread starter Thread starter cassero88
  • Start date Start date

cassero88

Guest
I tried it in June and went wrong and I had really studied so much now I will try again in July the professor and always available but the program is immense. and my last exam. How did you pass it?
 
Excuse me, except for the exam, but do you never put any accent on the verbs?
Sorry I didn't think I was on a literary forum and I thought that in the forums you wrote so to not waste time so much I seem to understand the same however I see that no one has done it and your answers are useless and irritating so I ask the moderator to delete the post if you can thank
 
Sorry., I didn't think I was on a literary forum. (and c) cI wrote that in the forums it was written so as not to waste time, I think I can understand the same. cI see no one'has done and your answers are useless and irritants so I ask the moderator to cancel the post, if you can. gBye.
:eek::cool:
irritant is to read your Italian without a crumb of punctuation in an unnecessarily piccat... I think it will take you more time to correct the argument than to understand and redigest the content.
write bad, when you can do it with a minimum of fairness, it is a sign of lack of respect to those who must read.

as to your request to cancel the post I hope it will be left here where it is. It's very educational. . .
Perhaps, as an accomplice to the google group, the prof. hall of the university of pavia reads it. .
 
Sorry I didn't think I was on a literary forum and I thought that in the forums you wrote so to not waste time so much I seem to understand the same however I see that no one has done it and your answers are useless and irritating so I ask the moderator to delete the post if you can thank
quoto marcof.
I have no words.

Have a good day!
 
I think behaviour is, like the Italian language, important in a working environment.
I often see an insulting and irreverent attitude towards students who only ask for clarification.
I think both sides were wrong in something: On the one hand nom I understand why to run against a person in this way and accuse her of not studying or engaging, on the other a frankly stupid question (because there are no tricks to pass such an examination) and the guilt of falling into provocations.
try to calm us all and understand that professionals must be respected and that we were all students (and we will always be)
 
I think behaviour is, like the Italian language, important in a working environment.
I often see an insulting and irreverent attitude towards students who only ask for clarification.
I think both sides were wrong in something: On the one hand nom I understand why to run against a person in this way and accuse her of not studying or engaging, on the other a frankly stupid question (because there are no tricks to pass such an examination) and the guilt of falling into provocations.
try to calm us all and understand that professionals must be respected and that we were all students (and we will always be)
I have a lot to say.
 
quoto luigi.paiano even if I regret to make you notice that our friend troll has screwed you once again.

Go see who wrote the comment that broke the bubbon.

I didn't answer on purpose.

p.s: I am of the opinion to keep it and not to ban it... we rejoice the yokes!
 
All right, thank you all for the answers. As I am very tense and spend the nights studying I created this post to feel the opinion of colleagues and maybe make us four laughs together. I have only this examination that keeps me tied to the three-year period, my only wish was to be a request for solidarity that has not been understood of course.
Thanks again to everyone.
 
What I find even more stupid than anything and not understanding that it was such a thing and having angered against a 20-year-old boy I hope I never become like you.
 
What I find even more stupid than anything and not understanding that it was such a thing and having angered against a 20-year-old boy I hope I never become like you.
as new as I am in this forum and so I cannot afford to give any kind of lesson, I agree with you 100%.
I've been working for almost ten years, but I always work with the university and the students, as someone in this forum knows.
as others told you, however, the question was a little bit misplaced and too generic, could interpret in a very negative way! we say that you have sinned a little naive... but at least for me it is a venial sin:

said this, the examination of machines has always been very heavy, regardless of the faculty: the quantity and diversity of the arguments is such that it is hard to find the ban of the slaughter. studies once, and you seem to remember nothing just because very dispersive for how it is set in Italian faculties.
I think it's the most beautiful (at least for me) examination of all mechanical engineering, and I have tried desperately to end up in this working field, succeeding us! I'm proudly "engineer", although only qausi of alternative volumetric machines (the least "philosophical" among the machines)! :biggrin:
give you advice for someone who has not followed your course is objectively difficult. . .not knowing the exact program, the exam modes, etc...
 
I hope I never become like you.
Engineers? :smile:

according to me you have made a series of errors of the beginner, which have been treated with hard tones by those who are years that always wand the same errors as beginner, and therefore is acidic.
who has been following these beatings for years, sees them in a certain way. instead, decontexting what you were told, you felt attacked, attacked. It's physiological, but not correct.

you often have a little humble and rather daring attitude, so much so that in a few messages you have already closed a thread for flame. You don't have to answer me.

Now things are two, or you're an arrogant guy, and I don't think, reading any more of your interventions, or you put yourself on the forum as if you were with friends in front of a beer. in the forum you do not know and write is different from talking. If you do not use a whole series of shortcomings imposed by the netiquette, those you call "by literates", you do not understand and you get suspicious to each other.

I have to tell the truth then, in this thread, you had the bad luck of having had among the first answers, those of lucretius, a professional flamer (probably already banned and risen with other nick), and of marcof one that tends to be very rigid, even if for educational and commendable purposes.

All clear?
 
Sorry I didn't think I was on a literary forum
True, it is not a forum of literates.
However, it is a forum of people with medium high schooling (diploma or degree) and your superficiality in writing (as long as it is only superficiality and nothing else) is an indicator that denotes an embarrassing approach even in university preparation.


I hope I never become like you.
in vino veritas;
I talked about approximation; instead it was true wisdom and presumption.
 
as new as I am in this forum and so I cannot afford to give any kind of lesson, I agree with you 100%.
I've been working for almost ten years, but I always work with the university and the students, as someone in this forum knows.
as others told you, however, the question was a little bit misplaced and too generic, could interpret in a very negative way! we say that you have sinned a little naive... but at least for me it is a venial sin:

said this, the examination of machines has always been very heavy, regardless of the faculty: the quantity and diversity of the arguments is such that it is hard to find the ban of the slaughter. studies once, and you seem to remember nothing just because very dispersive for how it is set in Italian faculties.
I think it's the most beautiful (at least for me) examination of all mechanical engineering, and I have tried desperately to end up in this working field, succeeding us! I'm proudly "engineer", although only qausi of alternative volumetric machines (the least "philosophical" among the machines)! :biggrin:
give you advice for someone who has not followed your course is objectively difficult. . .not knowing the exact program, the exam modes, etc...
Of course, but it is possible that a forum of engineers who believe so clever and clever that they can criticize others did not understand that it was a joke that they are only able to look at the Italian? and logical that the examination is being studied but it is a great disappointment to see colleagues or presumed such that they do not understand the ironic sense of my question. They make me laugh really maybe you understand why you're close to students. I'd like to specialize in the gas turbine engines. I heard about cars with this engine and I'd like to try them :)
thanks for the answer
 
Of course, but it is possible that a forum of engineers who believe so clever and clever that they can criticize others did not understand that it was a joke that they are only able to look at the Italian? and logical that the examination is being studied but it is a great disappointment to see colleagues or presumed such that they do not understand the ironic sense of my question. They make me laugh really maybe you understand why you're close to students. I'd like to specialize in the gas turbine engines. I heard about cars with this engine and I'd like to try them :)
thanks for the answer
I'll tell you I'm almost done with the specialist, so I'm not a real engineer.
you are right about the tones used by some users and,as you read, I defended you but you also have to learn that the business and professional scope is different from taking a beer among friends.
Trust that, following this forum, I discovered passions and interests and learned from many people: It is true, there are users who despise for the taste of doing it, but there are many others that with their severity make you understand the right direction and what awaits you outside the university walls.
Therefore, you have the whole reason of the world to complain, but avoid generalizing and making the victim; it is a council;)
 
I think behaviour is, like the Italian language, important in a working environment.
I often see an insulting and irreverent attitude towards students who only ask for clarification.
Yeah, okay. These concerns are the favorite of psychologists who study the "young disaster" because the pargols are yelled at by teachers or because too many tasks stress them.

by a student who is going to graduate as far as I am concerned it is unacceptable to write that way. if he then responds piccato to whom gle points out (because the first and second post of this thread are really written by suck) then it is even more likely to replenish the dose.

then you do as you like... but if I were to correct tasks or thesis written in that way there would be many less graduates and graduates around.

and ke caxxo! :rolleyes: :smile:
 
Of course, but it is possible that a forum of engineers who believe so clever and smart that they can criticize others do not understand that it was a joke? (cut)
:eek:
for contents your parrebe post comes from kindergarten, for form, syntax and grammar I don't know exactly, but certainly not from university. . .
And now go tell the teacher that I treated you badly.
 
Of course but it is possible that a forum of engineers who believe so clever and smart that they can criticize others do not understand that it was a joke?...
I get it!
You were joking about Italian:cool:

If he was still alive, he would have made you a bunch of dicks that you'd be banished by yourself.
 

Forum statistics

Threads
44,997
Messages
339,767
Members
4
Latest member
ibt

Members online

No members online now.
Back
Top