family modeling with cylinders

[Danig]

Hello, everyone.
I'm going crazy trying to create a family by modeling different cylinders.
is a wall lamp, and at the time when I create the family all right, as seen from the image

when I finally load the family into the project, this happens

I don't know how to fix it, now I'd try to shape it in place and see if I can. .
I believe it has to do with the reference plans, because the horizontal and vertical parts are ok, but it is their connection that probably makes the model high.
I tried but I don't know how to say to hold the vertical cylinder at a certain distance from the wall, the altitude makes me take only the base and the top, not the sides of the cylinder. .

How do I solve this?

 

[Danig]

Okay, modeling the place remains as it must remain, and it's fine.
There is only one problem: I don't have the light source.
When I create the family, it automatically puts me in place.
How do I add it?

 

[gfrank]

the second image is not seen.
as you drew the vertical cylinder: extrusion, extrusion on path, revolution, or what else?
probably, mistakes in the constraints and management parameters of the various extrusions.
If you can post the family, for a verification.

 

[Danig]

the second image is not seen.
as you drew the vertical cylinder: extrusion, extrusion on path, revolution, or what else?
probably, mistakes in the constraints and management parameters of the various extrusions.
If you can post the family, for a verification.

Strange, yesterday I saw them all and 2.. Anyway, it happens that the vertical part, including the ball, moves all left, almost half the horizontal cylinder.

I designed the cylinder both as an extrusion and as a route extrusion, but nothing changes.
I know that the problem is of the bond, in fact I cannot understand how to bind the cylinder (which has the perpendicular base to the wall) to stay at a certain distance. .

Now I am out, after I try to post the family (for now I solved by making a device not to wall, which I align where I need it..it is not the maximum but it works).