flat repetition

[deep70]

incredible but true, after a thousand times I try it out.. inexplicably alone almost say.. you created the configuration 23 and magically now there is... it's amazing.

 

[MassiVonWeizen]

there might be a hidden body; How many bodies are indicated in the feature manager?

 

[deep70]

there might be a hidden body; How many bodies are indicated in the feature manager?

beautiful question, the bodies in total should be 5 but the tree seems a little messed up and sincerely and unclear. .
I'll take it back to you.

 

[MassiVonWeizen]

not to fall on these trivial things... Let's talk about the abc on
top in the tree there is a folder with separate cut writing (created automatically when making structural members and sheets); is where you see how many bodies are present and whether they are visible or not.

 

[deep70]

I didn't understand.

 

[MassiVonWeizen]

in fact there you have 7 plates.
control what you erased the bodies

 

[deep70]

I still wanted to point out that the solution is exactly as you said in canceling the previous configuration and remaking it, only that it didn't come out immediately but after several tests.

 

[deep70]

in fact there you have 7 plates.
control what you erased the bodies

in total the deleted bodies were 6, the sheets in total are 7 rightly, even the side wallpapers they made them in the sheet environment. .

 

[MassiVonWeizen]

in total the bodies eliminated were 6, the sheets in total are 7 rightly

In such case that with only sheet metal body you have two flat repetition is very strange. you could clean unused functions (right button on the name of the part in the feature>shaft destroyed...) and see if it goes away, if you want to investigate, otherwise peace with the world and so be it

 

[deep70]

In such case that with only sheet metal body you have two flat repetition is very strange. you could clean unused functions (right button on the name of the part in the feature>shaft destroyed...) and see if it goes away, if you want to investigate, otherwise peace with the world and so be it

Sure, I try and tell you.

 

[deep70]

hi massi, as I said I proceeded to check according to your suggestion, I press that the problem once closed sw and reopened has been represented, I made present to the client everything, they have tried also various solutions but without result, they also asked the aid of the technical assistance sw, it seems that the piece is done in a somewhat abnormal way, so I assume they will do the incriminating piece, I put it anyway from you
Thank you very much for giving me your precious assistance and wish you a good day.