gives to solid pass to sheet

[F.Devis]

Good morning to all, I have this trivial quarrel for you to undergo:
I designed this solid and tried to turn it into sheet metal, I did the lacerations and wanted to put it in the drains before turning it into sheet metal, it is possible to do it without putting in a sketch with rounds and then cut. my question is: there is by chance a key that makes the downloads directly. Thank you.
Devis

 

[MassiVonWeizen]

you have attached a blank file

 

[F.Devis]

I hope it works

 

[MassiVonWeizen]

You're shaping terrible.

my question is: there is by chance a key that makes the downloads directly.

modeling directly with sheet metal functions

 

[F.Devis]

I'm sorry, you're right. I thought I'd find a further road that could be faster. Thank you very much for your help.

 

[MassiVonWeizen]

considering that to do that particular you used 4 functions, you still lacked one for the unloading of the corners and you still had to turn it into sheet for a total of 6 functions I would say you were far from the fast road.
with sheet metal functions you do it in 2/3 overall functions with the safety that the model is actually developable