help extruding profile

[Dalla Valle Marco]

Good morning
is the first time I write in this forum, my name is rotten and I follow solid models for the stone industry.
I normally carry out very simple forms, but this time I have to model in profile for a marble cover along a spline that follows the trend of the scale.
I can't do it with the sweep with 1 or 2 tracks, I was wondering if someone could give me some indication to run it.
Thank you all for the help you continue to give in this forum

 

[marcof]

(cut)
I have to model in profile for a marble cover along a spline that follows the trend of the scale.
I can't do it with the sweep with 1 or 2 tracks, I was wondering if someone could give me some indication to run it.

eh already, all 50,000 cad3d subscribers just behind your back and see your pc's monitor while you're working.
from the caxxo, try to reread and tell me if it seems to you that, without the crystal ball model xtralusso someone on this planet can understand that damn shape you have to reproduce and what are the problems you encounter!
but I say, it takes so much to set a question by correcting it of all the necessary so that who reads can understand?

 

[Dalla Valle Marco]

eh already, all 50,000 cad3d subscribers just behind your back and see your pc's monitor while you're working.
from the caxxo, try to reread and tell me if it seems to you that, without the crystal ball model xtralusso someone on this planet can understand that damn shape you have to reproduce and what are the problems you encounter!
but I say, it takes so much to set a question by correcting it of all the necessary so that who reads can understand?

is there a possibility to upload a file and in what format in this forum?
I do before I explain.

 

[marcof]

is there a possibility to upload a file and in what format in this forum?

when you reply click on "go to the avanazata mode" and you will find the graphite icon to insert attachments (images, rar file or zip etc)

I do before I explain.

That's why I asked you to correct the question of everything you need to understand the problem, i.e. to correlate images, screenshots, cad files etc.

 

[Dalla Valle Marco]

here is the file, in a few words it is a sweep on 2 tracks that in this case are the spline that follows the climb of the staircase.
the problem is that in the initial narrow circle I find a strange deformation that I can't handle.
Thank you for your help.