how to bring a drawing to scale

[ioome]

Hi, I just copied an image... the image obviously loaded it in autocad... all right, until they told me that the picture below wasn't on the scale... given my inability with autocad, alcurne people put the image below in scale... now the image is in scale, while the drawing is packed... how do I bring the drawing to the same scale as the image, not to remake everything from the top? Is that possible?

Thank you very much in advance and... Good day:

 

[Tristan]

scale with reference. for details f1 awards

 

[Shape]

if I didn't understand your problem is to put image and design at the same scale. . .

ok as tristan says in right command is scale with the reference option.

basically you have to make a proportion, knowing the size of the image and design you have to take one element of each other and put them in proportion.

then take 10/100/1000mm of the image and scale the drawing with reference bringing 10/100/1000mm of the drawing to the same size of the image.

 

[prismacad]

go here: I have dedicated a lesson on wheel and reference scale with an example of an insertion in the maphttp://www.prismacad.it/wordpress/corso-autocad-baselesson 9
Hi.
g.p.

 

[shikigami]

...just scale with reference.. . .
first however type "dist" at least check the various sizes