i look for aesthetically beautiful vines (commercial? )

[reggio]

hi, I have the need to mount various pieces of a painted machine, such machine is much more aesthetically cared for than usual (usually we put normal hexagonal or brown or flared screws) as it is destined to a store with access to the public.

I wanted to find a life that:
- you can shake and drop by hand (zigrinata or similar)
- do not have caves like brugol seats where dust or dirt can be deposited
- both aesthetically pleasing
- better if stainless
- small height encumbrance
- ma6/8 l=10/15mm

I have searched on the internet under special screws or screws for furniture, but I did not find anything interesting, so I ask help to you by asking for some names or links, I would like to avoid having to do to lathe 50/100/200 special pieces ...

soon

 

[Oldwarper]

hi, I have the need to mount various pieces of a painted machine, such machine is much more aesthetically cared for than usual (usually we put normal hexagonal or brown or flared screws) as it is destined to a store with access to the public.

I wanted to find a life that:
- you can shake and drop by hand (zigrinata or similar)
- do not have caves like brugol seats where dust or dirt can be deposited
- both aesthetically pleasing
- better if stainless
- small height encumbrance
- ma6/8 l=10/15mm

I have searched on the internet under special screws or screws for furniture, but I did not find anything interesting, so I ask help to you by asking for some names or links, I would like to avoid having to do to lathe 50/100/200 special pieces ...

soon

I'm going to get you to the lathe first.
Usually these "beauty" things have biblical delivery times.
Have you tried the sites for PC tuners?
or, by putting "decorative balloons in gugol I found these:
http://www.it.easyparts.nl/showarticles/0-4-221/set-bulloni.htmlSincerely, I think it costs you less to get them done by an automatic turning machine. . .

 

[Guido]

yes, brass turning and post nikeling or similar or stainless steel....

guide

 

[myface]

Perhaps these?

 

[reggio]

Perhaps these?

You beat me for a breath.

with "zigrinate invitations" had arrived here http://forum.nexthardware.com/gallery/index.php?n=13083 ...too high the head....
And then there was nico... but it has too high neck...
http://www.emico.de/it/p_a08b18.htm mod 140 is almost there, only that it is polyamide and has the cut in the head...

...the search continues.. .

 

[marcofor]

Hello try to look at the manufacturers of standardized type halder, elesa, norelem.
I found these http://www.halder.de/produkte/artgr...1&g=3&intas=3&s=ita&menu=296&submenu=products

 

[reggio]

Hello try to look at the manufacturers of standardized type halder, elesa, norelem.
I found these http://www.halder.de/produkte/artgr...1&g=3&intas=3&s=ita&menu=296&submenu=products

I like these, if they were polished...
excellent straight, I feel if they have dealers, thanks guys :d

 

[marcofor]

I like these, if they were polished...
excellent straight, I feel if they have dealers, thanks guys :d

polished no but in stainless steel are found see here http://www.norelem.de/cms/wm?catid=...vis%e9e%20and%20acier%20ou%20inox%20din%20464it also produces elesa but start from m5 to prove it from the sellers of technical articles in your area