idraulic motor with encoder

[noni]

Hello everyone,
I am new to the forum so I hope I have written in the appropriate section. my request is rather simple, I wanted to know if it is possible to find on the market an oleodynamic motor with embedded encoder, or with at least one predisposition for attacarcene one.
I thank everyone who answers. :smile:

 

[cacciatorino]

Hello everyone,
I am new to the forum so I hope I have written in the appropriate section. my request is rather simple, I wanted to know if it is possible to find on the market an oleodynamic motor with embedded encoder, or with at least one predisposition for attacarcene one.
I thank everyone who answers. :smile:

I can't answer you in detail, but I have the curiosity to know the purpose of this application, can you tell us? Then maybe it turns out that different and more taditional solutions are good!

 

[noni]

I can't answer you in detail, but I have the curiosity to know the purpose of this application, can you tell us? Then maybe it turns out that different and more taditional solutions are good!

thanks for the interest of the same :d in essence is a small conveyor belt in a waste collection machine that has to move. for now you have the engine with the encoder both mounted on a rack, the problem is that the encoder often and willingly bends and damages for that I would need an embedded one. I hope I have explained well and have satisfied your curiosity:d

 

[Andrea Bellachioma]

Could you post a pattern or image?

 

[cacciatorino]

thanks for the interest of the same :d in essence is a small conveyor belt in a waste collection machine that has to move. for now you have the engine with the encoder both mounted on a rack, the problem is that the encoder often and willingly bends and damages for that I would need an embedded one. I hope I have explained well and have satisfied your curiosity:d

Let's make it clear, thank you!

 

[Enigma]

Hello everyone,
I am new to the forum so I hope I have written in the appropriate section. my request is rather simple, I wanted to know if it is possible to find on the market an oleodynamic motor with embedded encoder, or with at least one predisposition for attacarcene one.
I thank everyone who answers. :smile:

hi "noni" the danfoss ho ua series of hydraulic motors with "tachometer attack" back (I never used them).

enigma

 

[noni]

hi "noni" the danfoss ho ua series of hydraulic motors with "tachometer attack" back (I never used them).

enigma

Thank you very much for your help. Now I try to take a look

 

[Pascuz]

...in essence it is a small conveyor belt in a waste collection machine that you have to move. for now you have the engine with the encoder both mounted on a rack, the problem is that the encoder often and willingly bends and damages for that I would need an embedded one. I hope I have explained well and have satisfied your curiosity:d

Hello, noni,
I allow myself to give another point, if it can serve.. . .
I read that the encoder bends and damages.
when mountain encoder I always make sure that the shaft does not act radial/axial/moment loads, typically using flexible joints.
besides this I usually try to put it in a position protected by dust/sporco, maybe using small tanks.

Have you taken similar precautions?
(You're not putting the pinion on the encoder directly? )

Hello, Paul

 

[noni]

Sorry for the long absence, I was busy.
thank you paolo for your answer, the precautions were taken, but given the narrow space I think that the puzzle is the best solution. I have to assess the costs.
I will let you know, while I thank everyone for helping me and getting interested

 

[Pascuz]

perfect let us know!
p