idw display problems

[il_Batto]

Good morning, everyone!
I'm still here asking for help from a problem I've ever had before.

imagining my set, in some details, I noticed that some body parts are not displayed. here an example:that represented is a curve of a collector in carpentry.
as you can see missing a flange and reinforcements.

from browsers I tried to see if all the leotards were visible and everything was fine.

Is there any settling that has messed up, or is it the graphics card that begins to betray me?



Thank you.
Faithful

 

[Matteo Cappelli dis.CAD]

Hi.
you have also enabled options in the view:

 

[il_Batto]

Thanks for the answer.
I don't know if yours is a question or an indication.

I had already tried to tick and remove the two options even before posting the request, but nothing.

Now I have tried both cases and updated the view but nothing changes to me.

 

[Matteo Cappelli dis.CAD]

Hi, it was an indication, but if it doesn't work... .

 

[Zac69]

view, display options: displays tangent edges.

 

[il_Batto]

After several attempts and tests of putting into the table, even with your indications, I can tell you with certainty that it is a matter of regeneration of the views.
I put on the table (in several tables for different processing needs) the layout, sometimes without the part of 3d reliefs with laser scanners, and sometimes complete.

the problem arises only in the complete plants (modeled part + relief - where you see most edges and relief lines), while in the views and sections no problem.

in the layouts with only the shaped parts (cut the visibility check of the part) all ok.

at the end I solved with the mechanic where I quoted everything (exigenzes of the final customer unfortunately) making copies of the views ok, replacing them with the pieces in partial view.

I didn't find a definitive solution anyway.

thanks to everyone for the answers
Faithful