info nx7.5

[matfio]

Hello everyone,
Are there any new models of solids and surfaces from nx7 to the new nx7.5? if what? (obviously generalizing)

 

[The_Matrix]

Hello everyone,
Are there any new models of solids and surfaces from nx7 to the new nx7.5? if what? (obviously generalizing)

Well, many... It's a little hard to make a list.
- sketcher always full constraint
Boolean is now "inferred", so you don't have to tell him what to do.
- the offset surface can now be partial, so possibly you can complete by hand in the rognosis points
- the datums have the "offset" option so save one of construction
- extrusion allows the use of "self intersecting" curves: useful to create ribs
- you can view sketch odds and change them without entering sketch mode
- reusable sections 2d were introduced
- the "groups" have been improved. for me for example odio i layer I'm a manna.
- was introduced / f i n a l m e n t e / the tritangent blend: works very well and is very fast
- the global deformation allows to bend solids in a very powerful and controlled way
- in global shaping have introduced ray reduction function
- the "patch opening" function has been greatly improved as reliability
- you can choose the "body type" (solid/surface) in almost all creation commands
- you can convert a umparametrize feature to a linked body... useful for downstream applications
- the i-form has been introduced to apply the typical deformations of solid surfaces (if you go on youtube find some avi with a camera x example)
- the match edge has been upgraded by using any type of surfaces (b-surface or trimmed)
- syncronous technology has been improved in a lot of aspects.
- in general the interface is improved and is + intuitive

... maybe you should take a look at what's news.

 

[matfio]

Thank you very much
what's news are just written news that in reality in the "field" are not usable because not reliable. it is always necessary to test the novelty because the client rightly wants the parametric project changeable over time.

 

[The_Matrix]

Thank you very much
what's news are just written news that in reality in the "field" are not usable because not reliable. it is always necessary to test the novelty because the client rightly wants the parametric project changeable over time.

?? I don't understand you, but it's age.

 

[matfio]

mmmmm you're right, I'm going to explain, good evening.

 

[The_Matrix]

mmmmm you're right, I'm going to explain, good evening.

Yeah, maybe it's better...

 

[matfio]

I just wanted to say that I read the news but sometimes I find myself unable to use them because unreliable and you have to wait for some releases.
Anyway I love this software.:smile:

 

[matfio]

However I am anxiously waiting for the new version, I hope you will arrive within short

 

[matfio]

a the_matrix

cosa intendi per "sketcher sempre full constraint"?

 

[The_Matrix]

nx7.5 is available from May.
nx7.5.1 arrives on August 10th.
nx7.5.2 is for October (it will be the one that 90% will take a famous Italian car manufacturer)

with "sketcher always full constraint" I mean that while sketching he quotes and puts the constraints and your section is always full constraint.
The odds he puts are "debt"... if you put one is considered "strong" and he removes those weak.
If you say and put a contradiction in contradiction then asks you what to do.. .

 

[matfio]

a nice saving of time.... .

 

[The_Matrix]

a nice saving of time.... .

I like it, but you will see that many will not like it.

 

[stef_design]

The odds he puts are "debt"... if you put one is considered "strong" and he removes those weak.
If you say and put a contradiction in contradiction then asks you what to do.. .

like concept proe?

 

[The_Matrix]

like concept proe?

That's right.
is one of the fruits of a major nx migration project of an important pro/e client (very/many/many very "near" to us, we understood as siemens plm ex ugs).

 

[stef_design]

That's right.
is one of the fruits of a major nx migration project of an important pro/e client (very/many/many very "near" to us, we understood as siemens plm ex ugs).

I recommend... tell this important customer not to import nx visualization and interface of proe:biggrin:
I'm kidding! ! !

 

[The_Matrix]

I recommend... tell this important customer not to import nx visualization and interface of proe:biggrin:
I'm kidding! ! !

the first fruits are:
- full constraint sketcher
- tritangular radius
- passage pro/e > nx retaining features / associativeness 2d-3d / assembly constraint
- multi-cad "checomelofanxnonc isnopernessuno"
- integration nx/maple

 

[matfio]

Does anyone know how to explain the functionality of assembly clearance?
I'd like to use it by self-taught. I try to explain:
I want components to support one with the other not to be marked but only those in interference (if you can give a measure)"tot" cents. Can you do that? How?
I don't know if I was clear.

 

[matfio]

direct sketch what is it?
....or better what's the difference between sketch and direct sketch?

 

[The_Matrix]

What you want to do on the clerances you can't do.
at the limit you can delete from the control those that are in mating or touching.

the direct sketch is the sketch that you do without selecting the section plan (and its horizontal reference).
for the rest the features are equivalent.