inserting screws from bookshelf on asole

[windreef]

good morning, is there a way to insert the screws automatically on sunshades as it happens for holes? I have many pannellations with sunshades and putting the screws is a hell.
Thank you very much

 

[reb_bl]

No, or at least not that I know. I will then tell you that I don't need the vines, only a few times to swallow.

 

[aiq]

I personally make a 0.1mm hole wider in the slot where I want to put the corresponding screw...and use that cylindrical hole to fix the screw...
It's sniffed to squirt... but it is a manna for constraints...

 

[windreef]

No, or at least not that I know. I will then tell you that I don't need the vines, only a few times to swallow.

unfortunately serve for material counting and must be

I personally make a 0.1mm hole wider in the slot where I want to put the corresponding screw...and use that cylindrical hole to fix the screw...
It's sniffed to squirt... but it is a manna for constraints...

This at the sketch level? but how do you bind it you have to activate the sketch display.

 

[Cast16]

from 2020 version you can:

 

[windreef]

from 2020 version you can:

fantastic!!! Thank you very much.

 

[aiq]

I extrude it so...