inventor tilted holes, how to do?

[lorenzojin]

hi to all use quite regularly inventor but are in difficulty to realize tilted holes compared to a plane.
can we have a parallelepipedo and on it make holes with a sloping axle with respect to the upper facade how should we proceed?

 

[stefanobruno]

hi to all use quite regularly inventor but are in difficulty to realize tilted holes compared to a plane.
can we have a parallelepipedo and on it make holes with a sloping axle with respect to the upper facade how should we proceed?

Hi.
I also invite you to come before you ask for help, it is a good rule of civil cohabitation.

As for your problem, one of the solutions is to create a tilted worktop on which you will attach the sketch of your hole's position.
the tilted work plan can do this as follows:
Worktop icon, select a edge of the parallelepiped, select a reference plane, type the required angle.
This is one of the possibilities.
another is to make you a reference sketch for the new work plan and then proceed as previously described, using the sketch instead of the edge.

Welcome among us.

 

[lorenzojin]

hi I'm not succeeding I'm going crazy if someone creates a step-by-step tutorial even in desktop photos to create these tilted holes starting from a parallelepiped 150x100x50, on the face "larga" in the center create a 20 inclined deep hole of 15th in the axis.
Sorry about that. ! ! ! !
n.b. use inventor professional 2010

 

[User1]

Hi.
I also invite you to come before you ask for help, it is a good rule of civil cohabitation.



Welcome among us.

Maybe use a little too strong tones with newcomers! It is good that it is your role, but yes a little more tolerant! ! ! ! ! !

 

[User1]

hi to all use quite regularly inventor but are in difficulty to realize tilted holes compared to a plane.
can we have a parallelepipedo and on it make holes with a sloping axle with respect to the upper facade how should we proceed?

you could use a sketch on the interested floor and create a second sketch on the orthogonal plane to the first that will be the path of the translation of the first sketch, using the sweep!

 

[robonave]

Give me an email I'll send you the explanations. Hi.

 

[User1]

Give me an email I'll send you the explanations. Hi.

You can easily put them on the net here on the forum!

 

[lorenzojin]

you could use a sketch on the interested floor and create a second sketch on the orthogonal plane to the first that will be the path of the translation of the first sketch, using the sweep!

but with the sweep I went out a curve in practice I have to make a tilted hole compared to an axis then I can't build a sketch on a working plane I'm slipping

 

[robonave]

I have prepared a little tutorial if you don't care if you let me know....thanks

 

[lorenzojin]

I have prepared a little tutorial if you don't care if you let me know....thanks

Thank you all for the help provided to me in particular robonave (e_ _ _ _ or)
thanks to the prox

 

[robonave]

and I have answered you:bekle::bekle:bekle:bekle:
Let me know if you had a problem. Hi.
:wink:

 

[User1]

but with the sweep I went out a curve in practice I have to make a tilted hole compared to an axis then I can't build a sketch on a working plane I'm slipping

If you have already created the parallelepipedo, from the model tab activates the created 2d sketch function, select the face on which you want to rest the sketch, create the circumference. after you select the orthogonal plan on the first (always if you are working with rgb origins), otherwise create an orthogonal plan with the piano creation functions and that it is halfway of the first circumference, you can create the profile you want!

 

[User1]

Try to see how I did it!:finger:

 

[sampom]

Maybe use a little too strong tones with newcomers! It is good that it is your role, but yes a little more tolerant! ! ! ! ! !

in the regulation mixed it is also specified that judgment and operation of moderators are insendacable. for any remonstrations please contact the mod (or admin) in private. the mod, at its discretion (so without obligation any), will be able to respond and give any explanations. If it's wrong, there's already people who think about it without the need for a fool.
So we avoid certain interventions absolutely out of place.
In addition, explanations were given to the problem and was welcomed to the user.
everyone participates in respect of their role.
Thank you.

greetings
Mar

 

[User1]

in the regulation mixed it is also specified that judgment and operation of moderators are insendacable. for any remonstrations please contact the mod (or admin) in private. the mod, at its discretion (so without obligation any), will be able to respond and give any explanations. If it's wrong, there's already people who think about it without the need for a fool.
So we avoid certain interventions absolutely out of place.
In addition, explanations were given to the problem and was welcomed to the user.
everyone participates in respect of their role.
Thank you.

greetings
Mar

but no one is questioning the work of moderators!!! I also specified that your role and such! no one is going into discussions! for any remonstrations please contact the mod (or admin) in private.for my consideration there is no need to bring up third people! of times people and too susceptible!

 

[stefanobruno]

inclined holes starting from a parallelepiped 150x100x50, on the face "larga" in the center create a deep hole 20 inclined by 15° compared to the axis.

I'll draw you a set of screenshots.

I was out of the house.
I tried to tell the cad to do it alone but, when I returned, I had to do it myself, pressing with the mouse the right icons, in the right sequence and putting us a minimum of "good old design fantasy ".


Bye.

 

[sampom]

I tried to tell the cad to do it alone but, when I returned, I had to do it myself, pressing with the mouse the right icons, in the right sequence and putting us a minimum of "good old design fantasy ".

stefano,
I'm sorry I have to tell you. .
but you are obsolete as well as vetusto:hahahah:

greetings
Marco:smile:

I think it's almost time to retire in good order. leave room. .
if only they assigned us is blessed pension!:biggrin:

 

[lorenzojin]

I'll draw you a set of screenshots.

I was out of the house.
I tried to tell the cad to do it alone but, when I returned, I had to do it myself, pressing with the mouse the right icons, in the right sequence and putting us a minimum of "good old design fantasy ".


Bye.

stefano I just downloaded the file now I try a little but apologize you did a sketch (initial part dia in 3d? I usually design in 2d and then do the extrusion of how much I need. the first screen you created an axis?

 

[User1]

I'll draw you a set of screenshots.

I was out of the house.
I tried to tell the cad to do it alone but, when I returned, I had to do it myself, pressing with the mouse the right icons, in the right sequence and putting us a minimum of "good old design fantasy ".


Bye.

Well! A second option! the end justifies the means!:wink:
from but use already old software!:biggrin:
exist the release 2011:biggrin:

 

[User1]

stefano I just downloaded the file now I try a little but apologize you did a sketch (initial part dia in 3d? I usually design in 2d and then do the extrusion of how much I need. the first screen you created an axis?

used your own methodology! sketch and plan! After using the feature hole!:finger: