male thread (another post on this topic. . . )

[Pablo]

excuse ignorance, but what does the text circled in red mean? Can't be a tolerance, I think.... .

 

[meccanicamg]

excuse ignorance, but what does the text circled in red mean? Can't be a tolerance, I think.... .

is thread tolerance. you can use it in increased male practice and there are 3 or 4 standard tolerances, after which you need to make the male specially. are comfortable for males to roar in order to increase or decrease the material deformed from the passage of the male without changing the mold.

 

[Pablo]

Mah... It seems very close to me, like tolerance for a male by car.. actually on a site I found matching 6h as tolerance!!:tongue:

 

[meccanicamg]

Mah... It seems very close to me, like tolerance for a male by car.. actually on a site I found matching 6h as tolerance!!:tongue:

Trusted is so! you can do the prehort for a m6 from 5 to 5.3 and use a male m6-6h. you will get that as you increase the foreskin you will have less effort at the expense of a lower resistant section of the ripping thread.

if you use males with different tolerance reduce or increase the threading game in order to prepare space for a subsequent galvanic coating or not.

so much you don't have to produce males, and you don't have to do anything special, it's the usual male!

 

[Pablo]

Trust me!

In fact, as I have already answered before I found on a site the 6h wording.
thanks x the info, good make!