massively change the field " number part " in the table masses

[stefanobruno]

from the distinct of an iam set, I can easily change the "part number " that will be written in the table harvest cartiglio, typically will be equal to the file name without the ipt/iam extension.
Is there a way to easily change the same "part number" field written in the idw?
Is there a programme, a routine, which will allow me to change the mass property written in the dispossessions?
for ipt and iam models find themselves different, I find nothing for idw.

Thank you.

 

[Matteo Cappelli dis.CAD]

Hi.
Why do you have to change the part of the table?
I have always made him read the part of the model 3d and I have never compiled the ipropertied of the table .idw. What do you need?
Thank you.

 

[stefanobruno]

my client has implemented in his system a rule that controls this equivalence.
as the masses on the table are, often, recovered from previous orders and pointed to the new model, the field remains that of the particular that first generated that put on the table, idem for the creation date (which however changes in block from the properties / iproperty of explores resources )
in the folder, you never see this information but, in the properties of the file remain and the system intercepts them and signals anomaly.
in the past years it was not checked, now yes and the problem has arisen.
If you have to settle, as in this case, a few hundred harvests at the table, are pains.
by autodesk tell me that you can do with i-logic, only that I already have until it's enough to design and I don't understand anything about programming.

 

[Matteo Cappelli dis.CAD]

Hi.
this rule allows you to write the file name without extension in the number part of the table 2d
must be performed from the inside of the table.
you could try to do something like this:
open together.iam
run ilogic (to be done) opening to one to one tables.idw
alignment of iproperties

 

[Cast16]

...and pointed to the new model, the field remains that of the particular that first generated that put on the table, idem for the date of creation ....

in this link it seems that you talk about this case: https://clintbrown.co.uk/2019/02/02/ilogic-title-block/amp/ But you have to try it.

I guess you want to start the rule without opening the files one by one.
this other link speaks how to inject the rule on multiple files:https://beinginventive.typepad.com/...-and-ilogic-event-triggers-automatically.html

 

[Cast16]

tested stamatina and both work.

 

[stefanobruno]

thanks to the answers, I tried the matteo and it works, then I am a goat in these things and I have to understand well how to make it easily usable.
on the weekend I am hanging out for a moment and deepening the cast16 solution.

Thank you both.

 

[reb_bl]

thanks to the answers, I tried the matteo and it works, then I am a goat in these things and I have to understand well how to make it easily usable.
on the weekend I am hanging out for a moment and deepening the cast16 solution.

Thank you both.

use triggers, for example if you set the rule that functions "before saving" goes that it is a pleasure