mechanism - suppresses the joint

[pianta]

I define the pin connection
do two cylindrical surfaces with an insert and a mat that blocks the long axis of the cylinders

I'm supposed to have a zipper, I'm gonna snap that kind of compass in mechanism to move from placement to connection.

when I do application-->mechanism

the following message comes out

the higlighted connection(s) are not defined by two bodies.. if you continue, they will be suppressed and I do not remain the mobile joint.

suggestions?

 

[DANI-3D]

Hi.
try to take as reference, not surfaces, but axes and planes, and see if it improves.

 

[pianta]

I tried, nothing, same message

I add that:
1_exists the twin joint of this and works with the coupling of surfaces.

2_for each assembly surfaces of one part are referenced to define the bond

after detouring the bond as connnection appears, in the table "placement" the written rotation axis, as if one could indicate an axis.

I have never given it and links generally work, can it have anything to do with it?

 

[DANI-3D]

How many pieces make up your incriminating set?

 

[pianta]

about six thousand...

I solved, with a cabal more than with a real system:
given the joint stuck in the space with three constraints instead of canceling one and then turning it into a "mobile joint" of mechanism, I disabled the constrain that blocked the rotation around the axis of the joint, then I crushed the compass, proe said that it would erase the disabled bond, I crushed ok and it worked.
not once alone but four

 

[DANI-3D]

Can it be that you took references to a fixed part and used them directly in a mobile part, or vice versa? this could be indigested to pro-e

 

[pianta]

Does that explain better?
I don't understand, do you mean references together for modeling parts?

I tend not to use them. I normally prefer to take measures and report them.

In the specific case I didn't, if you meant this.

 

[DANI-3D]

Yes, I meant that.