• This forum is the machine-generated translation of www.cad3d.it/forum1 - the Italian design community. Several terms are not translated correctly.

mirrored part with relative table

  • Thread starter Thread starter andrea1974
  • Start date Start date

andrea1974

Guest
Hello, solidworks 2021, it's possible to mirror the part I saw, but to save the relative table?
example:
I have solid a and table a,
I have to make the solid on the left and the table on the left.
Do I have to do it again or can I recover it?
 
select the first view and in the property manager you will find the mirroring voice in which to set the horizontal or vertical direction.
this item is found only and exclusively for the first view inserted and not for those derived
 
Don't connect it. the mirror always covers the same file. in practice the part file or together remains always equal and only the views are mirrored; This means that the right and left version must be absolutely speculative.
any physical mirroring of a model cannot allow the recovery of the complete design from the original part because all entities change definition*

* by definition I mean that solid assigns a unique identifier to each entity
 
andrea1974 said:
you certainly thank you but still have to try. . .
Click to expand...
Look, it's been a week, I understand that you have other things to do, but I wonder what it's like to ask a question that's going to happen when. It is not polemic, I try to understand your dynamics.
 
We're messed up. simple :), to tell you, I read, I did not understand much, and I made the table left, losing time but for the moment it goes so... :-(
 
to simplify you could also do only the table left with its code by writing "as drawing" and writing the table code dx adding "mirror", I don't know if I was clear.
 
volaff said:
to simplify you could also do only the table left with its code by writing "as drawing" and writing the table code dx adding "mirror", I don't know if I was clear.
Click to expand...
I try to do it today. I understood in fact the right and left speech of the same file, in fact it does not make you rename the sx file in the pack ang go precisely because it is the same file.. .
 
problem: Two solids, one right and one left, the left, I'm not sure that it is updated because the traffic lights are continually appearing, even if you update with ctrl_q, I don't understand why.
 

Attachments

by the Regulation:
9) up - the practice of responding to messages to get them back to the top of the list (see up!) is to be considered prohibited. a forum is not a chat, you need patience to get answers.
 
I 2021 files can only open them as a solid model but not to check how they are made since I have 2020. but I can tell you for my experience that very often appear in some models the lights and sincerely you do not understand why. I do ctrl+q and disappear, then reappear, but I don't care, save and continue to work. I've never had a problem with that. But I don't think there's pb as I told you.
 
ah here in fact I have noticed that it should be all right, but I always have the doubt and sometimes it seems to me that they appear precisely to be unproposed.
 
question: on the left mirrored part there are more holes that do not serve than the right side. Can you hide or remove? only on the left side mirrored....
 
andrea1974 said:
question: on the left mirrored part there are more holes that do not serve than the right side. Can you hide or remove? only on the left side mirrored....
Click to expand...
I am not a swx user, but, logically, if a p/n "left" becomes different from the original, it must have a different p/n. I don't know
 

Forum statistics

Threads
44,997
Messages
339,767
Members
4
Latest member
ibt

Members online

No members online now.
Total: 1 (members: 0, guests: 1)
Back
Top