modeling motorcycle chain

[pasquale83]

Hi.

Who can help me in modeling a motorcycle chain?

precisely a "520" [ 1/4"(passo) x 5/8"(larghezza interna) ]I can't find a document or a guide that reports the various quotas of the shirts

I think they're unified, don't they?

is there an ad hoc toolbox in sw 2008? :biggrin:

 

[sampom]

1/4"(pass) x 5/8"(internal width)

is on the contrary: 5/8" step (15.875 mm) and 1/4" width (6.35 mm). in the garage I will have at least half a dozen disassembled:. But now I don't come to measure them.

I think they're unified, don't they?

Yes, but not with the "standard standards" for industrial chains.. is about the same, except for the internal width and the thickness of the platelets (generally). Anyway go here: http://www.tracepartsonline.net/(s(.../&tp=2&st=0〈=it&class=trace&fwsid=&ttl=catenesearch and download a step 5/8" chain (iso 10b) and then change the width to those 6.35 mm.

greetings
Marco:smile:

 

[pasquale83]

You were very helpful!

only that from those drawings do not find cmq the share of the central pin.

to make you understand, I'm drawing a tool to open, close and rename the shirts to use it near my bike...

only that I have to be able to find the quotas, both of the maximum (and I can do it using the caliber near my chain) and the diameter of the pin and the "head of the pin" reiterated

If not, design something useless/unusable :d