motor c10 launch

[salvatore87]

hello to all,I am a mechanical engineering student,and I am conducting a thesis in materials mechanics,which previews the analysis of a tree to elbows,with the help of ansys.the component is part of a motor launches,precisely that of the saloon appia model c10.to conduct the various types of analysis I would need the technical characteristics of the engine, in particular of the agent force on the pistons in the various phases of the working cycle?

 

[meccanicamg]

I don't know. the only one is to send an e-mail in lance/fiat and request internal regulations regarding the characteristics of the engine. but also with that you have torque and power curves...nothing more. You can always ask them if they give you some extra information... at least on the engine group, then the forces you revenues you.

 

[meccanicamg]

something you can get from here http://it.wikipedia.org/wiki/lancia_appia_berlinabut you must always have in hand the drawings of the components at least of the piston, bands, biellas, types bearings and something else to then make the calculation of the masses and check the balance and then load the shaft to elbows.

being vintage cars, you could find some info as I told you in the company directly, specifying that you need for university thesis etc.

 

[cesius79]

What do you need? the instant force for instant agent on the piston in the combution chamber?
hi mecc...also knowing the components is still very difficult business... .
savior, but did the prof not give you any material to draw from for such analysis? What kind of teachers. .. why don't they also ask you names, names and tax codes of those who assembled the first model? Mah...

 

[meccanicamg]

ehhh cesius...you know at university they give things to do but neither do they know where they come from.

x savior:... they don't even control them. ..piuttosto not wrong to use ansys...that will be the only thing that will look at your prof. and then it is a thesis...they will be there all embalmed to look for stupid and incompetent questions to you... Even if you put 1000 n or a thousand times so much change nothing.

 

[meccanicamg]

I forgot... look at these posts discussing some things on the camshaft http://www.cad3d.it/forum1/showthread.php?t=15704.

In the end, if you have no features, you should start from calculating how much statically it can endure, dynamically with fatigue analysis and rebuilding your fictitious load cycles. then departed by making the checks: static and fatigue. then forget how you got the variable data over time. at the limit compares with some other right motor to not shoot random numbers on variable loads and you can always say that you have a dear friend who lent you the test bench etc etc etc. ... goes so to university.

Remember that the engineer is the one who ingegnates and even if there are no data of a problem but you have the final solution... you can always find at least one plausible solution regarding the initial data to the problem (so it is not only a trick x solve the exercise)