move component

[Nibor]

Dear boys it has been for days that I try to insert the stop-to-cold command but I can't have results ... I have a set consisting of two parts is a box (base and cover) that has to open and close , after giving the couplings I wanted to insert the stop to collision so as to lock the cover along the edge of the base, with moving component I tried to give it the stop to collision that in the preview it does not work me in the cover. I don't understand where I'm wrong or if I have any unchecked settings in the options.....
I hope someone can help me... Thank you very much:

 

[Mike1967]

Dear boys it has been for days that I try to insert the stop-to-cold command but I can't have results ... I have a set consisting of two parts is a box (base and cover) that has to open and close , after giving the couplings I wanted to insert the stop to collision so as to lock the cover along the edge of the base, with moving component I tried to give it the stop to collision that in the preview it does not work me in the cover. I don't understand where I'm wrong or if I have any unchecked settings in the options.....
I hope someone can help me... Thank you very much:

do not make confusion between couplings together and couplings in studio movement, the two things are independent.
if you specify if you want to do it in the environment together or study movement (motion).
if you were using physical dynamics... remains active after you have closed the feature manager.
If you want to set the opening range of the door together, you can do it through advanced couplings using "limit angle".
you can set minimum and maximum angle.http://help.solidworks.com/2012/italian/solidworks/motionstudies/c_motion_study-specific_mates.htm
http://help.solidworks.com/2012/italian/solidworks/sldworks/physical_dynamics.htm
http://help.solidworks.com/2012/italian/solidworks/sldworks/hidd_new_add_mate.htm?rid=137672

 

[Nibor]

Thanks a thousand mike, excuse me but it's just that I use solidworks, I thought that set the stop to collision in the vertical direction through the command moves component the setting remained me also in the axieme field! While apparently there is no command in the axieme that allows the vertical opening movement of the lid and the blocks in an unfixed way to the edge of the box
Bye-bye

 

[Mike1967]

Thanks a thousand mike, excuse me but it's just that I use solidworks, I thought that set the stop to collision in the vertical direction through the command moves component the setting remained me also in the axieme field! While apparently there is no command in the axieme that allows the vertical opening movement of the lid and the blocks in an unfixed way to the edge of the box
Bye-bye

no, perhaps it did not understand, you can set the opening range of your door through the limit angle coupling.
let's say that you can use the physical dynamic to the point of contact so that the door stops at the point of contact... After, exiting from which command, apply the limit angle to the minimum angle, taking the share that suggests solidworks automatically.
take inspiration from this video (it is not mine).[youtube]~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~[/youtube]

 

[Nibor]

you will have understood I am a little shady
I'm going to study it right now, and I'll let you know...
Thank you very much
ciao nibor

 

[Mike1967]

you will have understood I am a little shady
I'm going to study it right now, and I'll let you know...
Thank you very much
ciao nibor

Hehheeh.. You have all night studying. . :biggrin: