• This forum is the machine-generated translation of www.cad3d.it/forum1 - the Italian design community. Several terms are not translated correctly.

movement between bearings and cams

  • Thread starter Thread starter Marvel
  • Start date Start date
Where did you put the contact point? must be placed on the outer diameter of the bearing and corresponding to the axis of the cylinder.
in the video it was useful to display the sketches of the coupling
 
the contact point is on the outer diameter of the bearing, at the top point identified by the vertical axis of the bearing and the outer surface of the bearing.

However I see to post the video with the sketches of the displayed parts.

Bye!

m
 
until Monday nothing together.... on the pc I use this weekend with win10 I can not do some things with sw2013.... I had seen that I couldn't use the toolbox and today I found that I can't even p&g because it says that a dll is not loaded: "Dll sldshellutils of solidworks cannot be loaded." ...
 
Hello, I tried to attach the zipped file of the axieme but it tells me that it is too big....2,2 mb...?? !

How can I solve this?

Bye!

Mar
 
will be a temporary limit due to the change of site.
You can always attach two zips with the files placed in one and another. then it will be enough to disappear everything in the same folder
 
How did you make those two zippers that I can't extract them? Haven't you split the main zip with any plans?
do the easy things: you have for example 7 files, take 3 and zip them then take the other 4 and zip them
 
in fact I did so.... they are 18 files in everything and I made 2 zips from 9 files each...
 
verify to be able to decompress them and then back to attach them because I tried various compression programs but always misfortune
 
No. when I have time and calm I will see how to do the movement.
to look well at the video that I posted you see that the wheels enter into the cam, so the path bond seems to go well but you should also bind the rotation of the wheel... what requires a deepening that I cannot do now
 
nothing, I tried in every way but either does not move or the axieme is ultradefined or the cam enters the bearing :mad:

I managed to do so only by setting a set with only the cam and the bearing.


the bearing flows on the path of the cam without entering into it, but when I try to replicate it in the axieme does not want to know
ciao!

Landmark
 

Attachments

the problem is that, as in reality, the bearing wheel and therefore can not be as if it were one with the pipe graft.
you have two solutions:
or make flexible the assembly tube in which the bearing inside has the possibility to rotate
or put the bearing externally to the axieme tube and that is in the axieme of the first level.
the choice must be made n function to what logistic constraints you have of the various components, but before doing with the flexible axieme (which can give problems of resolution couplings) I recommend to try it by putting the bearing in the axieme of first level and verify that the handling functions
 
I mean, the bearing and no pipe and nothing, right? only with the coupling path then.
 

Forum statistics

Threads
44,997
Messages
339,767
Members
4
Latest member
ibt

Members online

No members online now.
Total: 49 (members: 0, guests: 49)
Back
Top