multibody

[TECNOMODEL]

excuse the question perhaps banal but I looked in vain without finding anything.

if I create a part with more solid inside when I have to add a processing how do I select which solid to add it?

to be clearer: I create first solid, then the second. Now I have to add material to the first solid, automatically add it to the second. how do I decide in which solid to add processing?

 

[rf.infissi@libero.it]

on each processing find the solid button and select the solid you want to do for extrusion

deselection the first solid and select the second

 

[Polymar]

exact, look to the left of the window, under "profile" there is also "solid"

 

[GiGa]

I believe that the only command that acts indistinctly only on all bodies is the "divid"... for all others, as said, there is the appropriate selection button.

 

[Zac69]

I believe that the only command that acts indistinctly only on all bodies is the "divid"... for all others, as said, there is the appropriate selection button.

so, with a slight distinction depending on the commands.
on some commands there is written "solid" and then you can do that processing on the solids you want in one shot only, while on others it is written "solid" so you can at the limit uncheck the one proposed and select another, but you can do the processing on one solid only.