no longer takes the intersection snap

[MBT]

set the 8 digit units after the comma and recheck. . .

 

[GP.]

in property the vertical green polyline on elevatedon is = 0 only 0 ninth ho 0.0000

if you set dimzin = 1 will display all the zeros set in precision (luprec).

 

[jim78b]

ah thanks I set it to 8 which means 8?

 

[PlannerRoad]

ah thanks I set it to 8 which means 8?

There is something called online driving:
dimzin
Quick reference
see also
reduction of zeros in quotas
type: whole
Saved in: design
initial value: 0 (imperial units) or 8 (metric units)

controls the suppression of zeros in the value of primary units.

the values between 0 and 3 have effect only on the quotas expressed standing and inches:

0 suppresses the value of zero feet and precisely zero inches.
1 includes zero feet and precisely zero inches.
2 includes zero foot value and suppresses zero inches.
3 includes zero inch value and suppresses zero feet.
4 suppresses initial zeros in decimal quotas (for example, 0.5000 becomes .5000).
8 suppresses final zeros in decimal quotas (for example, 12,5000 becomes 12.5).
12 suppresses initial and final zeros (for example, 0.5000 becomes .5).the effect only on the standing and inches of the values included from 0 to 3 I did not remember.

 

[jim78b]

ok thanks again