non-continuous lines display scale

[gs1960]

I'm at the first weapons with inventor 2014 and I'm seeing the uncontinuous lines.
For example, the axis lines, based on the style of a particular center, are too "fitte".
I have seen that by changing the overall scale of the norm, I can achieve the desired effect, but with the counterpart to obtain even the dotted lines (e.g. the hidden ones), unavoidable.
the question is....how can I manage (and if it is possible) the various scales of the different types of line independently?
e.g. in autocad this is feasible through line/type/detail/global scale and current... but in inventor, I don't find the same solution.

Thank you all!

 

[gs1960]

colleagues. Can no one help me, please?

 

[ninfh]

What?

 

[gs1960]

I started from there, but changing those values does not change anything in the lines....and, in fact, this seems strange to me.. .

 

[ninfh]

umh, with that window you can change the lines inserted with the commands of center hole, axis line, bisector etc.

if you have to change the dotted lines of the view in if I'm sorry but I don't know how to help, I think you can do by changing the settings of the layers but I'm not sure, the 2 times on the cross that I needed it manually by selecting the few lines that I was interested in--------> right----->propriety.

 

[Catafratto]

I think you look for this value... you must select the norm. (use 2014, hope is equal)

 

[gs1960]

I think you look for this value... you must select the norm. (use 2014, hope is equal)View attachment 37621

thank you but that's not even what I'm looking for, because as I wrote in the first post, changing the global scale changes all the restraints.
I want to change only the axis ones (too thick), because the hidden lines hold me so well.....