nx and omnicad (flow blend)

[flaviobrio88]

the flow blend function of omnicad for nx allows to make a constant or variable radius fillet by building an automatic blend in areas where the fillet cannot walk.
http://www.screencast.com/t/xpsxjswu11u

 

[Utente NX]

Hi.
clearly nx would not have succeeded. Right?
Didn't you say it would be parametric? I think I see you're creating a body.
If I realized that instead of 40, I wanted 35, I have to delete my face and make the blend again?
there are icons in the toolbar of omnicad that are nx, since they are commands of omnicad, I would have expected proprietary icons, as indeed the commands of morphing, etc.

 

[flaviobrio88]

Hi.
clearly nx would not have succeeded. Right?
Didn't you say it would be parametric? I think I see you're creating a body.
If I realized that instead of 40, I wanted 35, I have to delete my face and make the blend again?
there are icons in the toolbar of omnicad that are nx, since they are commands of omnicad, I would have expected proprietary icons, as indeed the commands of morphing, etc.

hi user nx,
the freetransformerfornx meshtransformerfornx and flow blend commands are parametric the only thing and you can't double-click the mause tase to edit the feature but you have to go to the edit command (omnicad icon with the pencil) for now you will find them as a body editable only by the omnicad edict .
while if you want to use these commands and find them directly on the nx parametric tree you have to wait for the end of 2014.
Hi.
♪

 

[flaviobrio88]

as mentioned a few months ago I wanted to confirm that the flow blend, free and mesh modules were integrated into the nx paametric tree, and will be available from version 10.