nx8- comando draft - both side

[luca_dic]

- No.
- modeling
- draft command

How do we achieve a deform from both sides of a geometry?

e.g. Starting from a parallelepipedo, 200x100h20, do I want to shape the short sides with the split plane placed halfway between the two main flat faces?
wanting to distort it also with different angles.

I attach image.

Thank you.

 

[Utente NX]

what you are looking for was born with nx8.5.
with nx8 you have to divide the faces of the short side through the 'face divide' and add the sforms.
or, the classic extrusion command has integrated the sform from both sides.
this last solution is good for simple objects.

 

[ciciu]

But what you mean should be the 'solid formula', or 'body taper' and exist from multiple versions.
I have never used it, even because you have to have a partition element that includes the whole area to be shaped or use a plan - and the pieces divided on a plane exist only in the courses ; almost never in reality

 

[Utente NX]

But what you mean should be the 'solid formula', or 'body taper' and exist from multiple versions.
I have never used it, even because you have to have a partition element that includes the whole area to be shaped or use a plan - and the pieces divided on a plane exist only in the courses ; almost never in reality

the 'draft body' works contrary to what luca asked.
keeps the upper and lower surfaces firm.