okay, i've got problems with the table.

[K79]

Bye to all,

I ask for help, I whisper everything

I create a part, I define a construction line to place holes... beautiful...... it works.

I carry to the table and I do not have that line to indicate on what diameter they have to make the holes, I can not draw the circle to indicate the whirlwind.

Does anyone enlighten me? ? ?

thanks to all

I have problems with the cartouche, but it's another story.

Christian Christian

 

[callaghan]

you need to create a sketch on the table, selecting first the view that interests you
after which you project the geometries of the holes to be listed (exactly as you would do on a part)
at this point you can draw a circle, which will be the primitive diameter of the holes, referring to the geometry projected by the same
If you want you can change property to sketch objects, for example x a board you will check a line type tract-point, etc...
test, it is very simple
Bye!

 

[MauroM]

There is a command to do exactly what you ask. is located between the various icons to create the boards obviously in the table environment.

 

[K79]

thanks to both of you, I'll try Monday, in case I come back to break

 

[callaghan]

as rightly says maurom there is a special command
sometimes it happens that it does not work because it does not recognize the geometries, in that case it is worth my answer