out put problems in the controls.

[Disegnatore]

hello to everyone, I am a prime designer with cad 3d software, I started with inventor! I would like to know if it happens to you who work so hard with the same... ; of the times I give some commands, today I happened with the bevel on a solid revolution, the bevel was 2mm for 60°, but the software gave me error like out put, I had to close the file and restart it to get the required result! Why does this happen? I happen 3-4 times! Why? thank you all for your availability! hello!

 

[stefanobruno]

I want to know if it happens to you too

never happened.
If you want and you can, attach the incriminated file.

Bye.

 

[Disegnatore]

hi stefanobruno, now deleted it, as soon as I happen again I send it on this discussion! What do I do, save it when it gives me the problem as it is? I ask you this question, because every time I close it and restart it, the problem no longer exists!

 

[stefanobruno]

What do I do, save it when it gives me the problem as it is?

Yes.
Have you tried to make an installation restore?
What version do you use?

 

[Disegnatore]

use inventor professional 2011! and how should I make a restore installation? thank you for your availability!

 

[stefanobruno]

use inventor professional 2011! and how should I make a restore installation? thank you for your availability!

you must have in hand the installation cd, go to the control panel of win --> installation applications --> choose inventor --> repair installation (this xp, I don't know seven or view )
if I am not mistaken also by inserting directly the cd there is the possibility to start the restoration.

I remember that in this forum we talk about programs fired or in educational versions, please take into account.

Bye.

 

[Disegnatore]

Of course! very kind, as soon as I can make a try on what I said! Thank you very much!

 

[sampom]

I remember that in this forum we talk about programs fired or in educational versions, please take into account.

the "friend" (in fact, "friends":biggrin has it in English, so do a little yourself.:wink:

greetings
Marco:smile:

 

[Peppe]

the "friend" (in fact, "friends":biggrin has it in English, so do a little yourself.:wink:

greetings
Marco:smile:

Sorry guys I write here but I could write in many other last posts, I understand what is happening, but to see users (especially moderators) who shoot, suppose, make jokes etc... on this user/s, it is not that it is a good thing to see and much less intelligent. so I would invite everyone to completely ignore this user/i especially for the way he opens the discussions and the way he seeks help from all of us. It is of course a personal point of view that I do not want to offend anyone, but I repeat certain people are absolutely ignored even if you want to try to help anyone.
I'm sorry for the rash and I greet everyone.
Hi.

 

[stefanobruno]

completely ignore

It's the only thing I agree with.
For the rest, it doesn't seem to me that the hand was so heavy and so unintelligent.
I, I've already said it elsewhere, I feel like a fool, I always wear it.
It will be because I love to think that there are people worthy of being helped, obviously some guys think differently and who knows how much they have fun.
I hope that the guy will convert to the love, that to have fun frequent friends or to take off from the Zebedei, soon.


Bye.

 

[MBT]

Sorry guys I write here but I could write in many other last posts, I understand what is happening, but to see users (especially moderators) who shoot, suppose, make jokes etc... on this user/s, it is not that it is a good thing to see and much less intelligent. so I would invite everyone to completely ignore this user/i especially for the way he opens the discussions and the way he seeks help from all of us. It is of course a personal point of view that I do not want to offend anyone, but I repeat certain people are absolutely ignored even if you want to try to help anyone.
I'm sorry for the rash and I greet everyone.
Hi.

I speak for me, as a user more than moderator
the character in question is now known to the most, not only moderators
the approach with which it presented was certainly not the best, the fact that it was banana and subsequently re-written trying to take for the nose users and moderators certainly did not benefit
I agree with you that the best thing is to ignore him.
However, I also believe that other "real" niubbis can benefit from the answers that are given to his questions, both the techniques and the most impertinent ones.
We make the example of this 3ad... I never had the error that was reported. But maybe someone else does. This is good for messing up, it can benefit other users. it may be beneficial to circumscribe the circumstances, highlighting (to speak absurdly) that happens only with programs not exactly "legal". . .
Why ignore him? overall can help other people.. .
Therefore.. Forgive us if we occasionally throw some arrows or touch the user in question... It's not bad. It's not because we're bad.
but I personally believe that every now and then, without exaggerating, kicking in cul# someone will make it better

 

[Peppe]

I speak for me, as a user more than moderator
the character in question is now known to the most, not only moderators
the approach with which it presented was certainly not the best, the fact that it was banana and subsequently re-written trying to take for the nose users and moderators certainly did not benefit
I agree with you that the best thing is to ignore him.
However, I also believe that other "real" niubbis can benefit from the answers that are given to his questions, both the techniques and the most impertinent ones.
We make the example of this 3ad... I never had the error that was reported. But maybe someone else does. This is good for messing up, it can benefit other users. it may be beneficial to circumscribe the circumstances, highlighting (to speak absurdly) that happens only with programs not exactly "legal". . .
Why ignore him? overall can help other people.. .
Therefore.. Forgive us if we occasionally throw some arrows or touch the user in question... It's not bad. It's not because we're bad.
but I personally believe that every now and then, without exaggerating, kicking in cul# someone will make it better

I absolutely agree with you, perhaps the arrows are not that they have served a lot from what I am understanding (I limit myself only to navigate the inventor forum, so I couldn't say in the other things happened) and neither to ban such user, so my ignorance tells me to avoid such a character is the wisest thing; to give the answer to the question (only if approached constructively) and stop.
this allows other users to treasure the discussion. But if in 20 posts there are half of battutines and more.... the post is not so constructive.
I think this user is not doing anything about illegal, and I'm not offending anyone.
As for kicks in the c*** or people, I think it is not up to us to give education or radrized other users, it is in the common sense of these last ones.
I think that if the famous user for 1/2/3 times is absolutely ignored then he gets tired of creating tensions or approaching in a not entirely correct way.
always my personal opinion.
Sorry again

 

[MBT]

the drama does not arise when one asks, but when one affirms.
because if you say the right, even if with borioso or saccente, it's okay
But if he shoots caxxate, they're disasters. and someone more niubbo than him could believe him, follow the advice and, absurdly, get hurt even if not physically.

However, I would say enough ot... even because otherwise it becomes a trial without witnesses and without defenses, anceh if for now you are talking generically and not referring to a character in particular

 

[marcof]

I think this user is not doing anything about illegal, and I'm not offending anyone.

Well, being banished for 15 days and returning the next day with another nikname is not very correct. then they unleash you (because you're not an eagle) and then you show up with a third nikname, and just to confirm that you're not an eagle you're being snuck for the second time.
to each nikname correspond different credentials and declared different skills.
In short, how to fuck all the users of the forum who gave him credit and will give him in the future there is no bad? !

I would also point out that the type in question has begun to post as "tonyproge" at the end of the first ban. now it is registered on the forum with t3, diconsi tre nikname all active and that it uses simultaneously.
I would say that the last two are to be eliminated in office life and I add that if the guy was one with the balls would apologize with everyone for perculating and would start posing for what he is, a cad3d fan who makes models for dialect, and nothing more. There would be nothing wrong, indeed, he would certainly receive all the help he needs, and even more.

As for kicks in the c*** or people, I think it is not up to us to give education or radrized other users, it is in the common sense of these last ones.

except in the case that common sense does not exist, and tonyproge has proven widely not to have it. happy that I can find it, the common sense, and do what I have desired above.

 

[Disegnatore]

I enjoy drawing! downloading a software can be done for free, after 30 days expires! What's wrong? the rest of that said I don't care! Hello, everyone!

 

[Tarkus]

I enjoy drawing! downloading a software can be done for free, after 30 days expires! What's wrong? the rest of that said I don't care! Hello, everyone!

I feel like it's more than 30 days, even because once you've expired, it's not like you can ask and reinstall it again.
and then, sincerely, seen the use of English, I have the impression that that software you found it on the mule rump; (you can also change language, but by default the software of autodesk for Italy, is in Italian)
who did not do it at the beginning?
It only bothers me if what you do not do for fun, but, as your clone said in other discussion, you do it for the "bread" or as a job.
It's bad to know people are around (maybe it won't be your case)
who sells the designer's work to three lire because he has no expenses, while we poor sexes have to sneak out for software purchase and every year for updates.

I also add, quotating marcof, that if you need straight, you can receive them, at least on my part, but declared for what you are and without fury. As you can see, it takes a moment to figure out who's behind all these nicknames:

 

[marcof]

I enjoy drawing! downloading a software can be done for free, after 30 days expires! What's wrong?

Yeah? I didn't know you could download caia and on your site, dear tonyproge, there are a lot of models made with that software.

the rest of that said I don't care! Hello, everyone!

You don't care. You don't understand.

 

[marcof]

It only bothers me if what you do not do for fun, but, as your clone said in other discussion, you do it for the "bread" or as a job.

I'd feel like quiet about that. There is no danger that one who claims to have made the designer for ferrari before and now for agusta-westland, then model to that way and poses the questions we have read, can do for work any of those he has declared.
It seems to you that who does an animation of the assembling tree-biella-pistone-pinotto in the sequence you see here:http://progettistacatia3d.blogspot.com/2010_11_01_archive.htmlCan you have the slightest knowledge of what you're doing?
I also attach the avi file from the screenshot, you never know

I also add, quotating marcof, that if you need straight, you can receive them, at least on my part, but declared for what you are and without fury.

Seee... horse bell

 

[MBT]

Why? I'm sorry, Marcof, I know you're an expert on bats and nails, but you're the piston like the mountains?
will you not follow that ancient procedure of washing and oiling well the biella bearing, insert it gently in the eyelet, carefully mount the piston and then gently but firmly insert the pin and then stop it all with the appropriate elastic rings?
but come on... we're in 2010... now we use the spinotti that follow the rules of quantum mechanics and can safely cross the piston mantle!